標準號 |
中文名稱 |
英文名稱 |
| BS EN 12519-2004 |
窗戶和人行門.術語 |
|
| BS EN 1252-1-1998 |
低溫容器.材料.溫度低于-80℃時的強度要求 |
(Cryogenic vessels - Materials - Toughness requirements for temperatures below -80 鳦) |
| BS EN 1252-2-2001 |
低溫容器.材料.溫度在-80--20度的強度要求 |
(Cryogenic vessels - Materials - Toughness requirements for temperatures between -80 鳦 and -20 鳦) |
| BS EN 125200-1978 |
電子器件質量評定協調體系.分規范.線性變壓器用磁性氧化鐵芯 |
(Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for linear transformers) |
| BS EN 12522-1-1998 |
家具搬運業.私用家具搬運.服務規范 |
(Furniture removal activities - Furniture removal for private individuals - Service specification) |
| BS EN 12522-2-1998 |
家具搬運業.私用家具搬運.服務條款 |
(Furniture removal activities - Furniture removal for private individuals - Provision of service) |
| BS EN 12523-1999 |
外肢修復和外肢矯形.要求和試驗方法 |
(External limb prostheses and external orthoses - Requirements and test methods) |
| BS EN 12524-2000 |
建筑材料和產品.冷熱特性.列表設計閥門 |
(Building materials and products - Hygrothermal properties - Tabulated design values) |
| BS EN 12525-2000 |
農用機械.前裝載機.安全 |
(Agricultural machinery - Front loaders - Safety) |
| BS EN 12526-1999 |
腳輪和輪子.詞匯,推建用符號和多語種詞表 |
(Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary) |
| BS EN 12527-1999 |
腳輪和輪子.試驗方法和試驗設備 |
(Castors and wheels - Test methods and apparatus) |
| BS EN 12528-1999 |
腳輪和輪子.家具用腳輪.要求 |
(Castors and wheels - Castors for furniture - Requirements) |
| BS EN 12529-1999 |
腳輪和輪子.家具用腳輪.轉椅用腳輪.要求 |
(Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements) |
| BS EN 1253-1-2003 |
建筑物雨水口.要求 |
(Gullies for buildings - Requirements) |
| BS EN 1253-3-1999 |
建筑物集水溝.質量控制 |
(Gullies for buildings - Quality control) |
| BS EN 1253-4-2000 |
建筑物集水溝.通路蓋 |
(Gullies for buildings - Access covers) |
| BS EN 1253-5-2003 |
建筑物集水溝.可截流輕液體的集水溝 |
(Gullies for buildings - Gullies with light liquids closure) |
| BS EN 12530-1999 |
腳輪和輪子.手動操作的腳輪和輪子 |
(Castors and wheels - Castors and wheels for manually propelled institutional applications) |
| BS EN 12531-1999 |
腳輪和輪子.病床用腳輪 |
(Castors and wheels - Hospital bed castors) |
| BS EN 12532-1999 |
腳輪和輪子.速度在1,1米/秒(4公里/小時)以下的運輸裝置用輪子 |
(Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h)) |
| BS EN 12533-1999 |
腳輪和輪子.速度在1,1米/秒(4公里/小時)以上,4,4米/秒(16公里/小時)以下運輸裝置用的腳輪和輪子 |
(Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)) |
| BS EN 12534-1999 |
焊接消耗品.高強度鋼氣體保護金屬弧焊鍍層和焊條,金屬線,金屬電極.分類 |
(Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification) |
| BS EN 12535-2000 |
焊接材料.高強度鋼的氣體保護金屬電弧焊接用管狀芯電極.分類 |
(Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification) |
| BS EN 12536-2000 |
焊料.非合金鋼和抗蠕變鋼的氣體焊接用焊條.分類 |
(Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification) |
| BS EN 1254-1-1998 |
銅和銅合金.管件接頭.銅管毛細管釬焊法或緊隙銅焊法用端頭接頭 |
(Copper and copper alloys - Plumbing fittings - Fittings with ends for capillary soldering or capillary brazing to copper tubes) |
| BS EN 1254-2-1998 |
銅和銅合金.管件接頭.與銅管一起使用的壓合接頭 |
(Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with copper tubes) |
| BS EN 1254-3-1998 |
銅和銅合金.管件接頭.與塑料管一起使用的壓合接頭 |
(Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with plastics pipes) |
| BS EN 1254-4-1998 |
銅和銅合金.管件接頭.與毛細管或壓縮端連接的其它端頭一起使用的接頭 |
(Copper and copper alloys - Plumbing fittings - Fittings combining other end connections with capillary or compression ends) |
| BS EN 1254-5-1998 |
銅和銅合金.管件接頭.銅管緊隙銅焊法用短端頭接頭 |
(Copper and copper alloys - Plumbing fittings - Fittings with short ends for capillary brazing to copper tubes) |
| BS EN 12540-2000 |
金屬的腐蝕防護.鎳、鎳加鉻、銅加鎳和銅加鎳加鉻的電解鍍層 |
(Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium) |
| BS EN 125400-1984 |
電子器件質量評定協調體系.分規范.電感器和調諧變壓器與磁性氧化鐵芯一起使用的調節器 |
(Harmonized system of quality assessment for electronic components: sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers) |
| BS EN 125401-1984 |
電子件的質量保證協調體系.空白詳細規范.電感器和調諧變壓器用具有磁性氧化(鐵)線圈的調整器 |
(Harmonized system of quality assessment for electronic components - Blank detail specification - Adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers) |
| BS EN 12541-2003 |
衛生便池.壓力沖洗閥和自動關閉便池沖水閥PN10 |
(Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10) |
| BS EN 12542-2002 |
安裝在地面上的儲存容量最多不超過13M |
(Static welded cylindrical tanks, serially produced for the storage of Liquefied petroleum gas (LPG) having a volume not greater than 13 mUP3 and for installation above ground - Design and manufacture) |
| BS EN 12543-1-1999 |
無損檢驗.用于無損檢驗的工業X射線系統中焦點的特性.掃描方法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Scanning method) |
| BS EN 12543-2-1999 |
無損檢驗.用于無損檢驗的工業X射線系統中焦點的特性.針孔攝影機射線照相方法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Pinhole camera radiographic method) |
| BS EN 12543-3-1999 |
無損檢驗.用于無損檢驗的工業X射線系統中焦點的特性.狹縫攝影機射線照相方法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Slit camera radiographic method) |
| BS EN 12543-4-1999 |
無損檢驗.用于無損檢驗的工業X射線系統中焦點的特性.邊緣方法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Edge method) |
| BS EN 12543-5-1999 |
無損檢驗.用于無損檢驗的工業X射線系統中焦點的特性.小型和微型聚焦X射線管有效焦點尺寸的測量 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Measurement of the effective focal spot size of mini and micro focus X-ray tub) |
| BS EN 12544-1-1999 |
無損檢驗.X射線管電壓的評估和測量.電壓分壓法 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Voltage divider method) |
| BS EN 12544-2-2000 |
無損檢驗.X射線管電壓的測量和評估.用厚濾膜法進行連續檢驗 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Constancy check by the thick filter method) |
| BS EN 12544-3-1999 |
無損檢驗.X射線管電壓的評估和測量.度譜法 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Spectrometric method) |
| BS EN 12545-2000 |
鞋靴、皮革和人造革制品生產機械.噪聲試驗規程.通用要求 |
(Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements) |
| BS EN 12546-1-2000 |
與食品接觸的材料和物品.家用保溫容器.真空器皿、保溫瓶和保溫壺規范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for vacuum ware, insulated flasks and jugs) |
| BS EN 12546-2-2000 |
與食品接觸的材料和物品.家用保溫容器.保溫袋和保溫箱規范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for insulated bags and boxes) |
| BS EN 12546-3-2000 |
與食品接觸的材料和物品.家用保溫容器.熱包裝材料規范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for thermal packs) |
| BS EN 12547-1999 |
離心機.通用安全要求 |
(Centrifuges - Common safety requirements) |
| BS EN 12548-1999 |
鉛和合金.電纜鎧和護套用鉛合金鑄錠 |
(Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves) |
| BS EN 12549-1999 |
聲學.緊固件驅動工具的噪聲試驗規范.工程法 |
(Acoustics - Noise test code for fastener driving tools - Engineering method) |
| BS EN 1255-1996 |
內河航運船只.旋臂起重機 |
(Inland navigation vessels - Swing derricks) |
| BS EN 125500-1996 |
電子件質量評定的協調系統.分規范:干擾抑制和低級信號傳輸用環形氧化物磁芯 |
(Harmonized system of quality assessment for electronic components - Sectional specification: magnetic oxide ring cores for interference suppression and low level signal transformer applications) |
| BS EN 1256-1996 |
氣焊設備.焊接、切割和聯接處理設備的軟管附件規范 |
(Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes) |
| BS EN 12560-1-2001 |
法蘭及其接頭.標示等級的法蘭的襯墊.有或物插孔的非金屬水平襯墊 |
(Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic flat gaskets with or without inserts) |
| BS EN 12560-2-2001 |
法蘭及其接頭.標示等級的法蘭的襯墊.鋼法蘭用螺旋纏繞襯墊 |
(Flanges and their joints - Gaskets for Class-designated flanges - Spiral wound gaskets for use with steel flanges) |
| BS EN 12560-3-2001 |
法蘭及其接頭.標示等級的法蘭的襯墊.非金屬PTFE外殼襯墊 |
(Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic PTFE envelope gaskets) |
| BS EN 12560-4-2001 |
法蘭及其接頭.標示等級的法蘭的襯墊.鋼法蘭用的波紋狀、水平的或皺縮金屬和填充金屬襯墊 |
(Flanges and their joints - Gaskets for Class-designated flanges - Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges) |
| BS EN 12560-5-2001 |
法蘭及其接頭.標示等級的法蘭的襯墊.鋼法蘭用的金屬環接頭襯墊 |
(Flanges and their joints - Gaskets for Class-designated flanges - Metallic ring joint gaskets for use with steel flanges) |
| BS EN 12560-7-2004 |
法蘭及其接頭.分級標示法蘭用墊圈.鋼法蘭用涂覆金屬的套層墊圈 |
|
| BS EN 12561-1-1999 |
鐵路工具.有軌車.危險貨物運輸油罐車標記 |
(Railway applications - Tank wagons - Marking of tank wagons for the carriage of dangerous goods) |
| BS EN 12561-2-2003 |
鐵路設施.油罐車.包括回流蒸氣的液體產品用底卸式裝置 |
(Railway applications - Tank wagons - Bottom emptying devices for liquid products including vapour return) |
| BS EN 12561-3-2003 |
鐵路設施.油罐車.壓力下液化氣用底部裝卸式裝置 |
(Railway applications - Tank wagons - Bottom filling and emptying devices for gases liquefied under pressure) |
| BS EN 12561-4-2003 |
鐵路設施.油罐車.液態產品用頂部裝卸式裝置 |
(Railway applications - Tank wagons - Top devices for top emptying and filling of liquid products) |
| BS EN 12561-5-2003 |
鐵路設施.油罐車.液態產品用頂部裝填、底部卸料式裝置 |
(Railway applications - Tank wagons - Top devices for bottom emptying and top filling of liquid products) |
| BS EN 12561-6-2003 |
鐵路設施.油罐車.人孔 |
(Railway applications - Tank wagons - Manholes) |
| BS EN 12561-7-2004 |
鐵路設施.油罐車.月臺和梯子 |
|
| BS EN 12561-8-2004 |
鐵路設施.油罐車.加熱連接件 |
|
| BS EN 12562-1999 |
紡織品.對芳香聚酰胺復絲紗線.試驗方法 |
(Textiles - Para-aramid multifilament yarns - Test methods) |
| BS EN 12563-1999 |
非活性外科植入物.關節替代植入物.髖關節替代植入物的特殊要求 |
(Non-active surgical implants - Joint replacement implants - Specific requirements for hip joint replacement implants) |
| BS EN 12564-1999 |
非活性外科植入物.關節替代植入物.膝關節替代植入物的特殊要求 |
(Non-active surgical implants - Joint replacement implants - Specific requirements for knee joint replacement implants) |
| BS EN 12566-1-2000 |
高達50PT的小型廢水處理系統.預制的化糞池 |
(Small wastewater treatment systems for up to 50 PT - Prefabricated septic tanks) |
| BS EN 12567-2000 |
工業閥門.液化天然氣用隔離閥.適用性驗證試驗規范 |
(Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests) |
| BS EN 12568-1998 |
腳和腿的保護物.腳趾套和抗金屬刺入插入物的要求和試驗方法 |
(Foot and leg protectors - Requirements and test methods for toecaps and metal penetration resistant inserts) |
| BS EN 12569-1999 |
工業閥門.化學和巖石化學工藝工業閥門.要求和試驗 |
(Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests) |
| BS EN 12570-2000 |
工業閥門.操作件尺寸控制的方法 |
(Industrial valves - Method for sizing the operating element) |
| BS EN 12571-1999 |
與食品有關的材料和物品.與裝有成品食品容器相應的運輸單.熱和衛生要求和試驗 |
(Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing) |
| BS EN 12572-1999 |
人造攀援結構.保護點,穩定性要求和試驗方法 |
(Artificial climbing structures - Protection points, stability requirements and test methods) |
| BS EN 12573-1-2000 |
焊接的固定無壓熱塑性水箱.一般原理 |
(Welded static non-pressurized thermoplastic tanks - General principles) |
| BS EN 12573-2-2000 |
焊接靜態非壓力熱塑罐.垂直圓柱形罐的計算 |
(Welded static non-pressurized thermoplastic tanks - Calculation of vertical cylindrical tanks) |
| BS EN 12573-3-2000 |
焊接靜態非壓力熱塑罐.單層矩形罐的設計和計算 |
(Welded static non-pressurized thermoplastic tanks - Design and calculation for single skin rectangular tanks) |
| BS EN 12573-4-2000 |
焊接靜態非壓力熱塑罐.法蘭接頭的設計和計算 |
(Welded static non-pressurized thermoplastic tanks - Design and calculation of flanged joints) |
| BS EN 12574-1-2002 |
固定的廢棄物容器.耳軸、雙耳軸或袖珍提升裝置用帶平或圓形罩的1700l-5000l容量的容器.尺寸和設計 |
(Stationary waste containers - Containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting devices - Dimensions and design) |
| BS EN 12574-2-2002 |
固定的廢棄物容器.性能要求和試驗方法 |
(Stationary waste containers - Performance requirements and test methods) |
| BS EN 12574-3-2002 |
固定的廢棄物容器.安全要求和健康要求 |
(Stationary waste containers - Safety and health requirements) |
| BS EN 12575-1998 |
塑料.熱固模塑復合物.SMC中纖維浸濕程度的測定 |
(Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC) |
| BS EN 12576-1998 |
塑料.纖維增強復合物.SMC、BMC和DMC的壓縮模制試驗板的預先制備 |
(Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC) |
| BS EN 12579-2000 |
土壤改良劑和生長基質.取樣 |
(Soil improvers and growing media - Sampling) |
| BS EN 12580-2000 |
土壤改良劑和生長基質.量值的測定 |
(Soil improvers and growing media - Determination of a quantity) |
| BS EN 12582-1999 |
表面活性劑.按照HPLC/ELSD法測定非離子表面活性劑(乙氧基)中摩爾質量的方法測定聚乙二醇含量 |
(Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD) |
| BS EN 12583-2000 |
供氣系統.壓縮機泵站.功能要求 |
(Gas supply systems - Compressor stations - Functional requirements) |
| BS EN 12584-1999 |
氧氣火焰切割、激光束切割和等離子體切割的缺陷.術語 |
(Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology) |
| BS EN 12585-1999 |
玻璃裝置、管道和管件.DN 15至DN 1000的管道和管件.相容性和可互換性 |
(Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability) |
| BS EN 12586-1999 |
兒童護理物品.安慰奶嘴夾.安全要求和試驗方法 |
(Child care articles - Soother holder - Safety requirements and test methods) |
| BS EN 12588-1999 |
鉛和鉛合金.建筑用軋制薄鉛板 |
(Lead and lead alloys - Rolled lead sheet for building purposes) |
| BS EN 12589-2001 |
建筑物通風.空調終端設備.空氣動力試驗和恒定值以及變率終端設備 |
(Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units) |
| BS EN 12590-2000 |
紡織品.完全或部分用合成纖維制的工業縫紉線 |
(Textiles - Industrial sewing threads made wholly or partly form synthetic fibres) |
| BS EN 12591-2000 |
瀝青和瀝青粘合劑.鋪路級瀝青規范 |
(Bitumen and bituminous binders - Specifications for paving grade bitumens) |
| BS EN 12592-2000 |
石油及其制品的試驗方法.BS 2000-47.瀝青和瀝青粘合劑.溶解度的測定 |
(Methods of test for petroleum and its products - BS 2000-47: Bitumen and bituminous binders - Determination of solubility) |
| BS EN 12593-2000 |
石油及其制品的試驗方法.瀝青和瀝青粘合劑.Fraass斷裂點的測定 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the Fraass breaking point) |
| BS EN 12594-2000 |
石油及其產品的試驗方法瀝青和瀝青粘合劑.試樣的制備 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Preparation of test samples) |
| BS EN 12595-2000 |
石油及其產品的試驗方法.瀝青和瀝青粘合劑.運動粘度的測定 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of kinematic viscosity) |
| BS EN 12596-2000 |
石油及其產品的試驗方法.瀝青和瀝青粘合劑.用真空毛細管測定動力粘度 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary) |
| BS EN 12597-2000 |
瀝青及瀝青粘合劑.術語 |
(Bitumen and bituminous binders - Terminology) |
| BS EN 12598-1999 |
病人呼吸混合物用氧氣監測器.特殊要求 |
(Oxygen monitors for patient breathing mixtures - Particular requirements) |
| BS EN 12599-2000 |
建筑物通風.安裝通風和空調系統的試驗規程和測量方法 |
(Ventilation for buildings - Tests procedures and measuring methods for handing over installed ventilation and air conditioning systems) |
| BS EN 126-1995 |
燃?xì)馄骶叩亩喙δ芸刂破?/td>
| (Multifunctional controls for gas burning appliances) |
| BS EN 126-2004 |
燃?xì)馄骶叩亩喙δ芸刂破?/td>
| |
| BS EN 12600-2003 |
建筑玻璃.擺錘式試驗.沖擊試驗方法和平面玻璃分類 |
(Glass in building - Pendulum test - Impact test method and classification for flat glass) |
| BS EN 12601-2001 |
驅動發電裝置的往復式內燃機引擎 |
(Reciprocating internal combustion engine driven generating sets - Safety) |
| BS EN 12603-2003 |
建筑玻璃.魏布爾分布玻璃強度數據用置信區間和適配性規程 |
(Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data) |
| BS EN 12604-2000 |
工業,商業和車間門和大門.機械方面的要求 |
(Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements) |
| BS EN 12605-2000 |
工業,商業和車間門和大門.機械方面的試驗方法 |
(Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods) |
| BS EN 12606-1-2000 |
石油及其制品的試驗方法.瀝青和瀝青粘合劑.石蠟含量的測定.蒸餾法 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the paraffin wax content - Method by distillation) |
| BS EN 12606-2-2000 |
石油及其制品的試驗方法.瀝青和瀝青粘合劑.石蠟含量的測定.萃取法 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the paraffin wax content - Method by extraction) |
| BS EN 12607-1-2000 |
石油及其制品的試驗方法.瀝青和瀝青粘合劑.在熱和空氣影響下抗硬化的測定.RTFOT法 |
(Methods of test for petroleum and its products - Bitumen and bitumenous binders - Determination of the resistance to hardening under the influence of heat and air - RTFOT method) |
| BS EN 12607-2-2000 |
石油及其制品的試驗方法.瀝青和瀝青粘合劑.在熱和空氣影響下抗硬化的測定.TFOT法 |
(Methods of test for petroleum and its products - Bitumen and bitumenous binders - Determination of the resistance to hardening under the influence of heat and air - TFOT Method) |
| BS EN 12607-3-2000 |
石油及其制品的試驗方法.瀝青和瀝青粘合劑.在熱和空氣影響下抗硬化的測定.RFT法 |
(Methods of test for petroleum and its products - Bitumen and bitumenous binders - Determination of the resistance to hardening under the influence of heat and air - RFT Method) |
| BS EN 12608-2003 |
門窗制備用未增塑聚氯乙烯(PVC-U)型材.分類、要求和試驗方法 |
(Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods) |
| BS EN 1261-1995 |
一般用途纖維繩索.大麻繩 |
(Fibre ropes for general service - Hemp) |
| BS EN 12613-2001 |
具有視覺特性的地下電纜和管道用塑料警告裝置 |
(Plastic warning devices for underground cables and pipelines with visual characteristics) |
| BS EN 12614-2004 |
混凝土結構的保護和維修用產品和系統.試驗方法.聚合物的玻璃化轉變溫度的測定 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com