標準號 |
中文名稱 |
英文名稱 |
| prEN 61009-2-2-1993 |
家用和類似用途的有綜合過電流保護的剩余電流斷路器（RCCBs)第２－２部分：通用規則對功能上與線電壓有關 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs); part 2-2: applicability of the general rules to RCBOs functionally dependent on line voltage (IEC 61009-2-2:1991) |
| prEN 6101-2001 |
航空航天系列緊公差的100度中型平頭鉚釘英制系列 |
Aerospace series - Rivet, 100?medium flush head, close tolerance - Inch series |
| prEN 61010-2-010-2003 |
測量、控制和試驗室用電氣設備的安全要求第2-010部分：材料加熱 用實驗室設備的特殊要求 草案 |
IEC 61010-2-010, Ed. 2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material |
| prEN 61010-2-041-1996 |
測量、控制和實驗室用電氣設備的安全要求第2－41部分：醫療材料處理及實驗室加工用蒸壓器的的特殊要求 |
Draft IEC 1010-2-041: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes |
| prEN 61010-2-051-2003 |
測量、控制和實驗室用電氣設備的安全要求第２－５１部分：機械攪拌用實驗室設備的特殊要求 草案 |
IEC 61010-2-081, A1, Ed. 1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
| prEN 61010-2-061-2003 |
測量、控制和實驗室用電氣設備的安全要求第２－６１部分：具有熱原子化和離子化的試驗室用原子能譜儀的特 |
IEC 61010-2-061, Ed. 2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization |
| prEN 61010-2-071-1998 |
測量、控制和實驗室用電氣設備的安全要求第2－71部分： |
IEC 61010-2-071: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-071: Particular requirements for equipment used in extended environments |
| prEN 61024-1-2000 |
建筑物的雷電防護帶 |
Protection of structures against fire, explosion and life hazards |
| prEN 61029-2-11-2001 |
移動式電動工具的安全第２－１１部分：４５度角斜面接口椅的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws (IEC 61029-2-11:2001, modified) |
| prEN 61029-2-2-1997 |
移動式電動工具的安全第２－２部分：旋臂鋸的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for radial arm saws (IEC 61029-2-2:1993, modified) |
| prEN 61029-2-3-1997 |
移動式電動工具的安全第２－３部分：刨和刨板機的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers (IEC 61029-2-3:1993, modified) |
| prEN 61029-2-6-1992 |
移動式電動工具的安全第２－６部分：注水金剛石鉆的特殊要求 |
Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply |
| prEN 61029-2-7-1992 |
移動式電動工具的安全第２－７部分：注水金剛石鋸的特殊要求 |
Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply |
| prEN 61029-2-8-2002 |
移動式電動工具的安全第２－８部分：單芯軸垂直模壓機的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995 + A1:1999 + A2:2001, modified) |
| prEN 61035-2-4-1995 |
電氣裝置用導管配件規范第２部分：特殊需要第４節：鋁合金導管配件 |
Draft IEC 1035-2-4: Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 4: Conduit fittings of aluminium alloy |
| prEN 6104-2001 |
航空航天系列鋁或鋁合金實心鉚釘技術規范 英制系列 |
Aerospace series - Rivets, solid, in aluminium or aluminium alloy - Inch series; Technical specification |
| prEN 61048-2001 |
管形熒光燈和其它放電電燈電路用電容器的一般要求和安全要求規范 草案 |
Draft IEC 61048, Ed. 2: Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
| prEN 61058-2-4-1994 |
電器用開關第2-4:的特殊要求草案 |
Draft IEC 61058-2-4: Switches for appliances - Part 2-4: Particular requirements for independently mounted switches |
| prEN 61076-2-101-2003 |
電子設備用連接器第2-101部分：低壓、開關和控制裝置用帶有M8和M12螺旋接頭以及彈簧鎖的圓形連接器的空白 |
Connectors for electronic equipment - Part 2-101: Circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications |
| prEN 61076-2-103-2002 |
電子設備用連接器第2-103部分：多極系列連接器的詳細規范 |
IEC 61076-2-103: Connectors for electronic equipment - Part 2-103: Detail specification for a range of multipole connectors (type XLR) |
| prEN 61076-6-2003 |
電子設備用連接器分規范第6部分：電連接器用可拆缷接觸件 |
Connectors for electronic equipment - Part 6: Loose part contacts; Sectional specification |
| prEN 61079-4-1992 |
12GHz頻帶衛星廣播傳輸接收機的測量方法第4部分：NTSC制式數字副載波系統的聲音/數據解碼器裝置的電氣測 |
Methods of measurement on receivers for broadcasting satellite transmissions in the 12 GHz band-Part 4: Electrical measurements on sound/data decoder units for the digital subcarrier/NTSC system |
| prEN 61086-1-2002 |
承載印制電路板用涂料(敷形涂層)第1部分：定義、分類和一般要求 |
IEC 61086-1, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements |
| prEN 61086-2-2002 |
承載印制電路板用涂料(保護涂層)第2部分：試驗方法 |
IEC 61086-2, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test |
| prEN 61086-3-1-2002 |
承載印制電路板用涂料(保護涂層)第3部分：單項材料規范第1節：通用(I類)、高可靠性(II類)和航空涂料 |
IEC 61086-3-1, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials; Section 1: Coatings for general purpose (class 1), high reliability (class 2) and for aerospace (class 3) |
| prEN 61097-12-1996 |
全球海上遇險和安全系統(GMDSS)第12部分：救生船上的二路甚高頻便攜無線電話設備操作和性能要求、試驗 |
Draft IEC 1097-12: Global Maritime Distress and Safety System (GMDSS) - Part 12: Survival craft portable two-way VHF radiotelephone apparatus - Operational and performance requirements, methods of testing and required test results |
| prEN 61097-1991 |
雷達應答器海上搜索和營救(SART ) 操作和性能要求試驗方法和要求的試驗結果 |
Radar transponder; marine search and rescue (SART); operational and performance requirements; methods of testing and required test results (IEC 80(Central Office)22) |
| prEN 61097-2-1994 |
全球海上遇險和安全系統(GMDSS)第2部分：COSPAS-SARSAT EPIRB-406MHz衛星緊急定位無線電信標操作和性能 |
Draft IEC 61097-2: Global maritime distress and safety system (GMDSS) - Part 2: COSPAS-SARSAT EPIRB - Satellite emergency position indicating radio beacon operating on 406 MHz - Operational and performance requirements, methods of testing and required te |
| prEN 61097-3-1993 |
全球海上遇險和安全系統(GMDSS)第3部分：數字選擇呼叫(DSC)設備操作和性能要求、試驗方法和要求的試驗 |
Draft IEC 61097-3, part 3: global maritime distress and safety system (GMDSS); digital selective calling (DSC) equipment; operational and performance requirements; methods of testing and required testing results |
| prEN 61097-4-1994 |
全球海上遇險和安全系統(GMDSS)第4部分：INMARSAT-C 船載地面接收站和INMARSAT 增強群呼叫設備(EGC)操 |
Draft IEC 61097-4: Global maritime distress and safety system (GMDSS) - Part 4: INMARSAT-C ship earth station and INMARSAT enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results |
| prEN 61097-6-1994 |
全球海上遇險和安全系統(GMDSS)第6部分：船用導航、氣象預報和船只應急信息接收窄帶直接打印電報設備(NAV |
Draft IEC 61097-6: Global Maritime Distress and Safety System (GMDSS) - Part 6: Narrow band direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) - Operational and perfo |
| prEN 61097-7-1996 |
全球海上遇險和安全系統(GMDSS)第7部分：船用甚高頻無線電話發射機和接收機操作和性能要求、試驗方法和 |
Draft IEC 1097-7: Global maritime distress and safety system (GMDSS) - Part 7: Shipborne VHF radiotelephone transmitter and receiver - Operational and performance requirements, methods of testing and required test results |
| prEN 6110-2000 |
航空航天系列不銹鋼100 平頭盲螺栓 |
Aerospace series - Bolts, blind, 100?flush head, stainless steel |
| prEN 61108-1-2003 |
全球?qū)Ш叫l(wèi)星系統(GNSS)第1部分：全球定位系統(GPS)接收機設備性能標準、試驗方法和要求的試驗結果 |
Maritime navigation and radiocommunication equipment and system - Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS); Receiver equipment; Performance requirements, methods of testing and required test results |
| prEN 61108-4-2003 |
海上導航和無線電通訊設備和系統全球?qū)Ш叫l(wèi)星系統(GNSS)第4部分：船用DGPS and DGLONASS海上無線電接收 |
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment; Performance requirements, methods of testing and required test r |
| prEN 61120-1-1992 |
專業用6.3mm磁帶的數字音頻盤式磁帶盤錄音系統第1部分：一般要求 |
Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use; part 1: general requirements (IEC 61120-1:1991) |
| prEN 61121-2003 |
家用滾筒式干衣機性能測量方法 |
Tumble dryers for household use - Methods for measuring the performance (IEC 61121:2002, modified) / Note: Endorsement notice |
| prEN 61128-1993 |
交流隔離器由隔離器轉變總線變換電流 |
Alternating current disconnectors; bus-transfer current switching by disconnectors (IEC 61128:1992) |
| prEN 61130-1991 |
視頻系統用Y/C連接器電氣匹配值和連接器說明 |
Y/C connector for video systems; electrical matching values and description of the connector |
| prEN 61132-1991 |
具有系列結構產品的失效率預測 |
Failure rate prediction of items having a series structure |
| prEN 61133-1991 |
電氣索引機車車輛電力和熱力/電力機車車輛制成后和和投入運行前的試驗方法 |
Future IEC publication 61133; electric traction; rolling stock; test methods of electric and thermal/electric rolling stock on completion of construction and before entry into service |
| prEN 61156-1991 |
數字通信用對絞或星絞多芯對稱電纜的通用規范 |
Draft IEC 61156: generic specification for multicore and symmetrical pair/quad cables for digital communications |
| prEN 61158-2-2003 |
工業控制系統用范圍總線標準第2部分：物理層規范和服務定義 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification (IEC 61158-2:200X - (65C/289/FDIS)) |
| prEN 61158-3-2003 |
測量和控制用數字數據通信工業控制系統用現場總線第3部分：數據鏈路服務定義 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link layer service definition (IEC 61158-3:200X - (65C/290/FDIS)) |
| prEN 61158-4-2003 |
測量和控制用數字數據通信工業控制系統用現場總線第4部分：數據鏈路協議規范 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link layer protocol specifications (IEC 61158-4:200X - (65C/291/FDIS)) |
| prEN 61158-5-2003 |
測量和控制用數字數據通信工業控制系統用現場總線第5部分：應用層服務定義 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definitions (IEC 61158-5:200X - (65C/292/FDIS)) |
| prEN 61158-6-2003 |
測量和控制用數字數據通信工業控制系統用現場總線第6部分：應用層協議規范 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification (IEC 61158-6:200X - (65C/293/FDIS)) |
| prEN 61164-2002 |
可靠性增長統計試驗和估計方法 |
IEC 61164, Ed. 2. Reliability growth - Statistical test and estimation methods |
| prEN 61166-2001 |
額定電壓達72.5 kV及以上值的開關和預制開關組件抗地震性能驗證 |
Seismic qualification of switchgear and prefabricated switchgear assemblies for rated voltages of 72,5 kV and above |
| prEN 61175-1-1994 |
產品技術文獻中使用的圖形符號的設計第1部分：基本規則 |
Draft IEC 61175: Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules |
| prEN 61193-5-1999 |
軟焊接第5部分：印制電路板組件缺陷的登記和分析 |
IEC 61193-5: Soft soldering - Part 5: Registration and analysis of defects on printed board assemblies |
| prEN 61241-0-2002 |
有可燃性粉塵場合用電氣設備第0部分：一般要求 |
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| prEN 61241-1-1-1993 |
有可燃性粉塵場合用電氣設備第1部分：外殼保護的電氣設備第1節：設備規范 |
Electrical apparatus for use in the presence of combustible dust; part 1: electrical apparatus protected by enclosures; section 1: specification for apparatus |
| prEN 61241-1-2-1993 |
有可燃性粉塵場合用電氣設備第1部分：外殼保護的電氣設備第2節：設備的選擇、安裝和維修 |
Electrical apparatus for use in the presence of combustible dust; part 1: electrical apparatus protected by enclosures; section 2: selection, installation and maintenance of apparatus |
| prEN 61241-1-2002 |
有可燃性粉塵場合用電氣設備第1部分：外殼保護tD |
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures tD |
| prEN 61241-10-2002 |
有可燃性粉塵場合用電氣設備第10部分：存在或可能出現可燃性粉塵的地區的分類 |
Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present |
| prEN 61241-14-2002 |
有可燃性粉塵場合用電氣設備第14部分：選擇和安裝 |
Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
| prEN 61241-18-2002 |
prEN 61241-18-2002 |
|
| prEN 61241-2-4-1993 |
有可燃性粉塵場合用電氣設備第2部分：試驗方法第4節：塵/氣混合物最低易爆濃度的測定方法 |
Electrical apparatus for use in the presence of combustible dust; part 2: test methods; section 4: method for determining the minimum explosible concentration of dust/air mixtures |
| prEN 61249-2-1-2002 |
印制板和其它互連結構用材料第2-1部分：包被和非包被增強基材分規范集酚醞纖維紙增強層壓薄板、經濟級 |
IEC 61249-2-1, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-1: Sectional specification set for reinforced base materials, clad and unclad; Phenolic cellulose paper reinforced laminate sheet, economic grade,copper clad |
| prEN 61249-2-11-2003 |
印制板和其它互連結構用材料第2-11部分：包被和非包被增強基材分規范集聚酰亞胺 、阻燃型(垂直燃燒試 |
IEC 61249-2-11, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-11: Reinforced base materials, clad and unclad; Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined f |
| prEN 61249-2-2-2002 |
印制板和其它互連結構用材料第2-2部分：包被和非包被增強基材分規范集酚醞纖維紙增強層壓板、強電級、 |
IEC 61249-2-2: Materials for printed boards and other interconnection structures - Part 2-2: Sectional specification set for reinforced base materials, clad and unclad; Phenolic cellulose paper reinforced laminate, high electrical grade, copper clad |
| prEN 61249-2-21-2003 |
印制板和其它互連結構用材料第2-21部分：包被和非包被增強基材分規范集阻燃型(垂直燃燒試驗)銅包被的編 |
IEC 61249-2-21, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-21: Reinforced base materials, clad and unclad; Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning |
| prEN 61249-2-5-2003 |
印制板和其它互連結構用材料第2-5部分：包被和非包被增強基材分規范集阻燃型(垂直燃燒試驗)銅包被的溴 |
IEC 61249-2-5, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-5: Reinforced base materials, clad and unclad; Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defin |
| prEN 61249-2-6-2003 |
印制板和其它互連結構用材料第2-6部分：包被和非包被增強基材分規范集阻燃型(垂直燃燒試驗)銅包被的非 |
IEC 61249-2-6, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-6: Reinforced base materials, clad and unclad; Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burnin |
| prEN 61249-4-1-2001 |
印制板和其它互連結構用材料第4部分：非包被預浸處理材料分規范集第1節：阻燃型(垂直燃燒試驗)編織E-玻 |
IEC 61249-4-1 Ed. 1: Materials for printed boards and other interconnecting structures - Part 4: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards); Section 1: Epoxide woven E-glass prepreg of defined fla |
| prEN 61279-1993 |
分規范光學電信電纜 |
IEC 61279; sectional specification; optical telecommunication cables |
| prEN 61280-3-2-1998 |
光纖通信子系統基本試驗程序第3-2部分：模擬系統試驗程序視頻系統的載波-噪聲系數測量 |
IEC 61280-3-2: Fibre optic communication subsystem basic test procedures - Part 3-2: Test procedures for analogue systems - Carrier-to-noise ratio measurements for video systems |
| prEN 61280-3-3-1998 |
光纖通信子系統基本試驗程序第3-3部分：模擬系統試驗程序視頻系統復合二級失真測量 |
IEC 61280-3-3: Fibre optic communication subsystem basic test procedures - Part 3-3: Test procedures for analogue systems - Composite second-order distortion measurements for video systems |
| prEN 61280-3-4-1998 |
光纖通信子系統基本試驗程序第3-4部分：模擬系統試驗程序視頻系統用合成三重差拍次噪聲測量 |
IEC 61280-3-4: Fibre optic communication subsystem basic test procedures - Part 3-4: Test procedures for analogue systems - Composite triple-beat noise measurement for video systems |
| prEN 61280-3-5-1998 |
光纖通信子系統基本試驗程序第3-5部分：模擬系統試驗程序視頻系統交叉調制測量 |
IEC 61280-3-5: Fibre optic communication subsystem basic test procedures - Part 3-5: Test procedures for analogue systems - Cross modulation measurement for video systems |
| prEN 61280-3-6-1998 |
光纖通信子系統基本試驗程序第3-6部分：模擬系統試驗程序視頻系統接收器靈敏度測量 |
IEC 61280-3-6: Fibre-optic communication subsystem basic test procedures - Part 3-6: Test procedures for analogue systems - Receiver sensitivity measurement for video systems |
| prEN 61280-3-7-1998 |
光纖通信子系統基本試驗程序第3-7部分：模擬系統試驗程序發射機或接收機帶寬的測量 |
IEC 6128-3-7: Fibre optic communication subsystem basic test procedures - Part 3-7: Test procedures for analogue systems - Transmitter or receiver bandwidth measurement |
| prEN 61290-4-1-1999 |
光纖放大器試驗方法的基礎規范第4-1部分：模擬參數的模擬試驗方法用寬帶源試驗方法測定增益斜率 |
IEC 61290-4-1: Basic specification for optical fibre amplifier test methods - Part 4-1: Test methods analogue for analogue parameters - Gain-slope by broad-band source test method |
| prEN 61295-1995 |
廣播磁帶錄像機用校準帶 |
Calibration tapes for broadcast VTRs (IEC 61295:1994) |
| prEN 61300-2-22-2001 |
基本試驗和測量程序第2-22部分：試驗：溫度變化 |
IEC 61300-2-22, Ed. 2: Basic test and measurement procedures - Part 2-22: Tests; Change of temperature |
| prEN 61334-3-1-1998 |
采用配電線載波系統的配電自動化第3-1部分：主干線信號傳輸要求頻帶和輸出電平 |
Draft IEC 61334-3-1: Distribution automation using distribution line carrier systems - Part 3-1: Mains signalling requirements - Frequency bands and output levels |
| prEN 61337-1-2-1999 |
采用波導型介電諧振器的濾波器第1-2部分：試驗條件 |
Draft IEC 61337-1-2: Filters using waveguide type dielectric resonators - Part 1-2: Test conditions |
| prEN 61338-1-1-1997 |
波導型介電諧振器第1部分：一般信息和試驗條件第1節：一般信息 |
Waveguide type dielectric resonators - Part 1: General information and test conditions - Section 1: General information (IEC 61338-1-1:1996) |
| prEN 61338-1-2-1998 |
波導型介電諧振器第1-2部分：試驗條件 |
Draft IEC 61338-1-2: Waveguide type dielectric resonators - Part 1-2: Test conditions |
| prEN 61340-4-1-2003 |
靜電第4-1部分：對于專門用途的標準試驗方法地板覆蓋物和已裝修地板的靜電特性 |
IEC 61340-4-1, Ed. 2: Electrostatics - Part 4-1: Standard test methods for specific applications; Electrical resistance of floor coverings and installed floors |
| prEN 61372-2001 |
汽輪機及其循環的簡化熱性能試驗 |
Simplified thermal performance testing of steam turbines and their cycles |
| prEN 61386-1-2002 |
電氣裝置用導管系統第1部分：一般要求 |
Conduit systems for electrical installations - Part 1: General requirements (IEC 61386-1:1996 + A1:2000) |
| prEN 61393-1997 |
感應或靜電計用脈沖輸出裝置 |
Pulse output devices for induction or static meters (2 wires only) |
| prEN 61400-1-2003 |
風輪發電機系統第1部分：安全要求 |
Wind turbine generator systems - Part 1: Safety requirements (IEC 61400-1:1999, modified) / Note: Intended as replacement for ENV 61400-1 (1995-02). |
| prEN 61472-2003 |
帶電作業最小安全距離計算方法 |
IEC 61472, Ed. 2.0: Live working - Minimum approach distances for A.C. systems in the voltage range 72,5 kV to 800 kV - A method of calculation |
| prEN 61496-1-2003 |
機械安全電敏保護設備第1部分：一般要求和試驗 |
IEC 61496-1: Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| prEN 61506-1996 |
過程控制系統軟件和設備的文件編制 |
Documentation of software for process control systems and facilities |
| prEN 61520-1999 |
溫度計敏感器用金屬溫度計套管功能尺寸 |
IEC 61520: Metal thermowells for thermometer sensors - Functional dimensions |
| prEN 61535-2003 |
用于固定安裝固定連接的安裝連接器 |
IEC 61535, Ed. 1: Installation couplers intended for permanent connection in fixed installations |
| prEN 61545-1995 |
組安全出版物連接器件任何材料的夾緊裝置中的鋁線和鋁包夾緊裝置中銅線的連接器件 |
Draft IEC 1545: Group safety publication: Connecting devices - Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units |
| prEN 61554-1999 |
盤裝式設備電測量儀表盤裝尺寸 |
IEC 61554: Panel mounted equipment - Electrical measuring instruments - Dimensions for panel mounting |
| prEN 61587-3-1998 |
IEC 60917和IEC 60297系列機箱、機柜和分機柜的電磁屏蔽性能試驗 |
Draft IEC 61587-3: Electromagnetic shielding performance tests for cabinets, racks and subracks for the IEC 60917 and 60297 series |
| prEN 616-1991 |
連續操作設備和系統 設計、制造、安裝和試運轉階段的通用安全要求 |
Continuous handling equipment and systems; common safety requirements for design, manufacturing, erection and commissioning stages |
| prEN 61603-7-2003 |
采用紅外輻射的音頻和/或視頻及相關信號的傳輸?shù)?部分：會議及類似用途的音頻信號的數字傳輸系統 |
IEC 61603-7: Transmission systems for audio and/or video and related signals using infrared radiation - Part 7: Transmission systems for digital audio signals for conference and similar applications (TA3) |
| prEN 61606-1-2003 |
音頻和視聽設備數字音頻部件音頻特性的基本測量方法第1部分：總則 |
IEC 61606-1: Audio and audiovisual equipment - Digital audio parts; Basic measurement methods of audio characteristics - Part 1: General |
| prEN 61606-2-2003 |
音頻和視聽設備數字音頻部件音頻特性的基本測量方法第2部分：消費者使用 |
IEC 61606-2: Audio and audiovisual equipment - Digital audio parts; Basic measurement methods of audio characteristics - Part 2: Consumer use |
| prEN 61643-1-2000 |
與低壓配電系統連接的浪涌保護裝置第1部分：要求和試驗 |
Surge protective devices connected to low-voltage power systems - Part 1: Requirements and tests (IEC 61643-1:1998 + corrigendum 1998, modified) |
| prEN 61643-12-2000 |
與低壓配電系統連接的浪涌保護裝置第12部分：選擇和應用原則 |
Draft IEC 61643-12: Surge protective devices connected to low-voltage power distribution systems - Part 12: Selection and application principles |
| prEN 61643-2-1998 |
與低壓配電系統連接的浪涌保護裝置第2部分：選擇和應用原則 |
Draft IEC 61643-2: Surge protective devices connected to low-voltage power distribution systems - Part 2: Selection and application principles |
| prEN 61644-1-1998 |
與電信和信號網絡連接的浪涌保護裝置第1部分：性能要求和試驗方法 |
IEC 61644-1: Surge protective devices connected to telecommunications and signalling network - Part 1: Performance requirements and testing methods |
| prEN 61644-21-2000 |
與電信和信號網絡連接的浪涌保護裝置第21部分：性能要求和試驗方法 |
IEC 61644-21: Surge protective devices connected to telecommunications and signalling network - Part 21: Performance requirements and testing methods |
| prEN 61647-1-2001 |
低壓浪涌保護裝置件第1部分：氣體放電管規范 |
IEC 61647-1, Ed. 1: Components for low-voltage surge protective devices - Part 1: Specification for gas discharge tubes (GDT) |
| prEN 61647-2-2001 |
低壓浪涌保護裝置件第2部分：雪崩擊穿二極管規范 |
IEC 61647-2, Ed. 1.0: Components for low-voltage surge protection devices - Part 2: Specifications for Avalanche Breakdown Diode (ABD) |
| prEN 61647-3-2001 |
低壓浪涌保護裝置件第3部分：金屬氧化變阻器規范 |
Components for low-voltage surge protective devices - Part 3: Specifications for metal oxide varistor |
| prEN 61647-4-2001 |
低壓浪涌保護裝置件第4部分：閘流管浪涌抑制器規范 |
IEC 61647-4, Ed. 1: Components for low-voltage surge protective devices - Part 4: Specification for thyristor surge suppressor (TSS) |
| prEN 61660-3-1998 |
電廠和變電站直流輔助設施中的短路電流第3部分：計算舉例 |
IEC 61660-3: Short-circuit currents in DC auxiliary installations in power plants and substations - Part 3: Examples of calculation |
| prEN 61681-1-2000 |
超聲學場安全第1部分： 醫療診斷超聲波場分類表 |
IEC 61681-1: Ultrasonics - Field safety - Part 1: Classification scheme for medical diagnostic ultrasonic fields |
| prEN 61714-2-1997 |
產品技術文獻中使用的圖形符號設計第2部分：包括引用庫圖形符號在內的計算機敏感形式圖形符號及其互換要 |
IEC 61714-2: Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interch |
| prEN 61747-6-2002 |
液晶和固態顯示器件第6部分：液晶模塊的測量方法傳輸型 |
Liquid crystal and solid-state display devices - Part 6: Measuring methods for liquid crystal modules; Transmissive type |
| prEN 61753-061-3-2002 |
光纖互連器件和無源件性能標準第061-3部分：U類單模尾光纖隔離器非受控環境 |
IEC 61753-061-3: Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U; Uncontrolled environment |
| prEN 61753-091-3-2002 |
光纖互連器件和無源件性能標準第091-3部分：U類單模尾光纖循環器非受控環境 |
IEC 61753-091-3: Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single mode fibre optic pigtailed style circulators for category U; Uncontrolled environment |
| prEN 61753-2-6-2001 |
光纖互連器件和無源件性能標準第2-6部分：U類單模尾式光纖持續可變衰減器非受控環境 |
IEC 61753-2-6: Fibre optic interconnecting devices and passive components performance standard - Part 2-6: Single mode fibre pigtailed style continuously variabel attenuators for category U; Uncontrolled environment |
| prEN 61753-3-1-2001 |
光纖互連器件和無源件性能標準第3-1部分：C類單模光纖非連接DWDM裝置受控環境 |
IEC 61753-3-1, Ed. 1.0: Fibre optic interconnecting devices and passive components performance standard - Part 3-1: Single-mode fibre optic non-connectorised DWDM devices for category C; Controlled environment |
| prEN 61753-3-2-2001 |
光纖互連器件和無源件性能標準第3-2部分：連接到C類的單模端接光纖連接器受控環境 |
IEC 61753-3-2, Ed. 1: Fibre optic passive components performance standard - Part 3-2: Fibre optic connectors terminated on single mode fibre to category C; Controlled environment |
| prEN 61775-1-1994 |
產品技術文獻中使用的圖形符號設計第1部分：基本規則 |
Draft IEC 1775: Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules |
| prEN 61786-1998 |
關于人體暴露的低頻電場和磁場的測量儀表的特殊要求和測量指南 |
Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings - Special requirements for instruments and guidance for measurement |
| prEN 61804-1-2001 |
程序控制功能塊第1部分：一般要求 |
Function blocks for process control - Part 1: General requirements |
| prEN 61804-2-2003 |
程序控制功能塊第2部分：功能塊概念和電子裝置描述語言的規范 |
Function Blocks (FB) for process control - Part 2: Specification of FB concept and Electronic Device Description Language (EDDL) |
| prEN 61810-7-1997 |
機電式非定時限有或無繼電器第7部分：試驗和測量程序 |
Draft IEC 61810-7: Electromechanical all-or-nothing relays - Part 7: Test and measurement procedures |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com