標準號 |
中文名稱 |
英文名稱 |
| BS EN 28736-1992 |
未淬硬內螺紋錐銷 |
(Taper pins with internal thread, unhardened) |
| BS EN 28737-1992 |
未淬硬外螺紋錐銷 |
(Taper pins with external thread, unhardened) |
| BS EN 28738-1992 |
U形銷的平墊圈.A級產品 |
(Plain washers for clevis pins - Product grade A) |
| BS EN 2874-1996 |
鈍化耐熱鎳基合金制長雙六角頭緊公差標準柄中長螺紋螺栓.等級:1550MPa(室溫)/315℃ |
(Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature) /315 鳦) |
| BS EN 28749-1992 |
銷子和帶槽銷的剪切試驗 |
(Pins and grooved pins - Shear test) |
| BS EN 28768-1987 |
滿包運輸包裝件.耐顛覆損壞的性能測定方法 |
(Complete, filled transport packages - Method for determination of resistance to damage by toppling) |
| BS EN 288-2-1992 |
金屬材料焊接程序的規范和認可.電弧焊焊接程序規范 |
(Specification and approval of welding procedures for metallic materials - Welding procedures specification for arc welding) |
| BS EN 288-3-1992 |
金屬材料焊接程序的規范和認可.鋼的電弧焊焊接程序試驗 |
(Specification and approval of welding procedures for metallic materials - Welding procedure tests for the arc welding of steels) |
| BS EN 288-4-1992 |
金屬材料焊接程序規范和認可.鋁及鋁合金弧焊的焊接程序檢驗 |
(Specification and approval of welding procedures for metallic materials - Welding procedure tests for the arc welding of aluminium and its alloys) |
| BS EN 288-7-1995 |
金屬材料焊接程序的規范和認可.使用標準焊接程序的電弧焊接的認可 |
(Specification and approval of welding procedures for metallic materials - Approval by a standard welding procedure for arc welding) |
| BS EN 288-8-1995 |
金屬材料焊接程序的規范和認可.用預生產焊接試驗進行認可 |
(Specification and approval of welding procedures for metallic materials - Approval by a pre-production welding test) |
| BS EN 288-9-1999 |
金屬材料焊接程序的規范和認可.傳輸管道陸地和海岸對焊管道焊接用焊接方法試驗 |
(Specification and approval of welding procedures for metallic materials - Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines) |
| BS EN 28839-1992 |
緊固件機械性能.有色金屬制螺栓、螺釘、螺柱和螺母 |
(Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals) |
| BS EN 2884-1996 |
MoS2潤滑的陽極氧化鈦合金制短螺紋粗公差標準柄帶翼型十字槽的大柱頭螺釘.等級:1100MPa(室溫)/315℃ |
(Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized MoSDOWN2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 鳦) |
| BS EN 28846-1993 |
小船.電氣裝置.周圍可燃?xì)怏w的引燃防護 |
(Small craft - Electrical devices - Protection against ignition of surrounding flammable gases) |
| BS EN 28848-1993 |
小船.遠程操縱系統 |
(Small craft - Remote steering systems) |
| BS EN 2885-1996 |
鍍鎘合金鋼制短螺紋粗公差標準柄帶翼型十字槽的大柱頭螺釘.等級:900MPa(室溫)/235℃ |
(Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 鳦) |
| BS EN 2886-1996 |
鍍鎘合金鋼制短螺紋緊公差標準柄帶翼型十字槽的大柱頭螺釘.等級:900MPa(室溫)/235℃ |
(Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 鳦) |
| BS EN 2887-1995 |
鈍化耐蝕鋼制頭部加螺紋的標準六角頭螺栓.等級:600MPa(室溫)/425℃ |
(Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 鳦) |
| BS EN 28877-1994 |
信息技術. 系統間電子通信和信息交換基準點S和T的ISDN基本存取接口用插接器和接點分配 |
(Information technology - Telecommunications and information exchange between systems - Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T) |
| BS EN 2888-1995 |
鈍化耐蝕鋼制短螺紋粗公差標稱柄標稱六角頭螺栓.等級:600MPa(室溫)/425℃ |
(Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 鳦) |
| BS EN 2889-1995 |
鍍鎘合金鋼制短螺紋粗公差標準柄標準六角頭螺栓.等級:900MPa(室溫)/235℃ |
(Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification - 900 MPa (at ambient temperature)/235 鳦) |
| BS EN 289-1994 |
塑料和橡膠用的壓制和輸送機設計和制造的技術安全要求 |
(Rubber and plastics machinery - Compression and transfer moulding presses - Safety requirements for the design) |
| BS EN 289-2004 |
塑料和橡膠機械.壓力機.安全要求 |
|
| BS EN 28960-1993 |
家用和類似用途的冷藏箱、冰凍食品冷藏柜和食品冷凍箱空氣噪音的測量 |
(Refrigerators, frozen food storage cabinets and food freezers for household and similar use - Measurement of emission of airborne acoustical noise) |
| BS EN 2897-1996 |
鍍鎘合金鋼制短螺紋緊公差標準柄帶翼型十字槽的大柱頭螺釘.等級:1100MPa(室溫)/235℃ |
(Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) /235 鳦) |
| BS EN 28970-1991 |
木結構.用機械緊固件連接的接頭試驗.木材密度要求 |
(Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density) |
| BS EN 28996-1994 |
人類工效學.代謝熱量的測定 |
(Ergonomics - Determination of metabolic heat production) |
| BS EN 29008-1994 |
玻璃瓶垂直度試驗方法 |
(Glass bottles - Verticality - Test method) |
| BS EN 29009-1994 |
玻璃容器.以容器底作基準的瓶口高度和不平行性.試驗方法 |
(Glass containers - Height and non-parallelism of finish with reference to container base - Test methods) |
| BS EN 29046-1991 |
房層建筑.密封劑.常溫下粘附內聚特性的測定 |
(Building construction - Sealants - Determination of adhesion/cohesion properties at constant temperature) |
| BS EN 29048-1991 |
房屋建筑.連接件.使用標準化儀器測定密封劑可擠壓性 |
(Building construction - Jointing products - Determination of extrudability of sealants using standardized apparatus) |
| BS EN 29052-1-1992 |
聲學.動態勁度的測定方法.在住宅中浮隔地板下用的材料 |
(Acoustics - Method for the determination of dynamic stiffness - Materials used under floating floors in dwellings) |
| BS EN 29053-1993 |
聲學.聲學用材料.耐氣流的測定 |
(Acoustics - Materials for acoustical applications - Determination of airflow resistance) |
| BS EN 2906-1994 |
FE-PA92HT(A 286)耐熱鋼制雙六角頭自鎖螺母.等級:1100MPa(室溫)/650℃ |
(Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃) |
| BS EN 2907-1996 |
鍍銀FE-PA92HT(A286)耐熱鋼制雙六角頭自鎖螺母.等級:1100MPa(室溫)/650℃ |
(Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa (at ambient temperature)/650℃) |
| BS EN 29070-1991 |
信息技術.SGML支援設備.公用文本編寫人標識符登記程序 |
(Information technology - SGML support facilities - Registration procedures for public text owner identifiers) |
| BS EN 29073-1-1990 |
紡織品.非織造品的試驗方法.第1部分:單位面積質量的測定 |
(Methods of test for nonwovens - Methods of test for nonwovens - Determination of mass per unit area) |
| BS EN 29073-3-1990 |
紡織品.非織造品的試驗方法.第3部分:抗張強度和伸張度的測定 |
(Methods of test for nonwovens - Methods of test for nonwovens - Determination of tensile strength and elongation) |
| BS EN 2908-1994 |
FE-PA92HT(A286)耐熱鋼雙六角頭自鎖深鏜孔螺母.等級:1100MPa(室溫)/650℃ |
(Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃) |
| BS EN 2909-1995 |
鍍銀FE-PA92HT(A286)耐熱鋼制雙六角頭自鎖深鏜孔螺母.等級:1100MPa(室溫)/650C° |
(Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃) |
| BS EN 29090-1992 |
氣焊以及類似的處理過程中設備的氣密特性 |
(Specification for gas tightness of equipment for gas welding and allied processes) |
| BS EN 29092-1992 |
紡織品.無紡織品定義 |
(Textiles - Nonwovens - Definition) |
| BS EN 291-1992 |
壓力為200毫巴及其以下的家用可燃?xì)怏w靜態密封用橡膠密封件的材料規范 |
(Rubber seals - Static seals in domestic appliances for combustible gas up to 200 mbar - Specification for material) |
| BS EN 2910-1994 |
FE-PA92HT(A286)耐熱鋼制自鎖柄螺母.等級:1100MPa(室溫)/650℃ |
(Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650℃) |
| BS EN 29104-1991 |
封閉管道中液體流量測量.電磁液體流量計性能評定方法 |
(Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids) |
| BS EN 2911-1995 |
鍍銀FE-PA92HT(A286)耐熱鋼制自鎖柄螺母.等級:1100MPa(室溫)/650℃ |
(Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃) |
| BS EN 29117-1991 |
漆的試驗方法.與漆膜形成有關的試驗.漆和清漆.完全干燥狀態和完全干燥時間的測定.試驗方法 |
Methods of test for paints - Tests associated with paint film formation - Paints and varnishes - Determination of through-dry state and through-dry time - Method of test |
| BS EN 2912-1996 |
鋁合金制陽極化或鉻酸鈍化的大外徑平墊圈 |
(Washers, flat, large diameter, in aluminium alloy, anodized or chromated) |
| BS EN 2913-2000 |
鋼制鍍鎘的大直徑平墊圈 |
(Washers, flat, large diameter, in steel, cadmium plated) |
| BS EN 2914-1996 |
耐高溫鋼制鈍化的大外徑平墊圈 |
(Washers, flat, large diameter, in heat resisting steel, passivated) |
| BS EN 29168-1994 |
牙鉆手柄.軟管連接件 |
(Dental handpieces - Hose connectors) |
| BS EN 29171-1-1991 |
信息技術.信息交換用130mm只寫一次的盒式光盤.空白盒式光盤 |
(Information technology - 130 mm optical disk cartridge, write once, for information interchange - Unrecorded optical disk cartridge) |
| BS EN 29171-2-1991 |
信息技術.信息交換用130mm只寫一次的盒式光盤.記錄格式 |
(Information technology - 130 mm optical disk cartridge, write once, for information interchange - Recording format) |
| BS EN 29202-1993 |
珠寶.貴重金屬合金的純度 |
(Jewellery - Fineness of precious metal alloys) |
| BS EN 29241-2-1993 |
帶有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.作業要求指南 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Guidance on task requirements) |
| BS EN 29241-3-1993 |
帶有可視顯示終端(VDTs)的辦公室工作的人類工效學要求.視頻顯示要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Visual display requirements) |
| BS EN 2925-1994 |
FE-PA92HT(A286)耐熱鋼制長螺紋薄柄雙六角頭螺栓.等級:900MPa(室溫)/650℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A 286) - Classification: 900 MPa (at ambient temperature)/650℃) |
| BS EN 2926-1996 |
鍍銀FE-FA92HT(A286)耐熱鋼制長螺紋薄柄雙六角頭螺栓.等級:900MPa(室溫)/650℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃) |
| BS EN 2927-1996 |
NI-P100HT(鉻鎳鐵合金 718)耐高溫鎳基合金制長螺紋薄柄雙六角頭螺栓.等級:1275MPa(室溫)/650℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650℃) |
| BS EN 2928-1996 |
鍍銀NI-P100HT(鉻鎳鐵合金 718)耐高溫鎳基合金制長螺紋薄柄雙六角頭螺栓.等級:1275MPa(室溫)/650℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650℃) |
| BS EN 2929-1996 |
耐熱鎳基合金NI-P101HT(Waspaloy)制長螺紋薄柄十二角頭螺栓.等級:1210MPa(室溫)/730℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ℃) |
| BS EN 293-1992 |
壓力油霧化噴嘴.最低限度的要求.試驗 |
(Specification for oil pressure atomizing nozzles - Minimum requirements - Testing) |
| BS EN 2930-1996 |
鍍銀NI-P101HT(Waspaloy)耐高溫鎳基合金制長螺紋薄柄雙六角頭螺栓.等級:1210MPa(室溫)/730℃ |
(Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification:1210 MPa (at ambient temperature)/730 ℃) |
| BS EN 2931-1994 |
FE-PA92HT(A286)耐熱鋼制長螺紋薄柄T型頭螺栓.等級:900MPa(室溫)/650℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃) |
| BS EN 29313-1992 |
點焊設備.冷卻管 |
(Specification for resistance spot welding equipment - Cooling tubes) |
| BS EN 2932-1996 |
鍍銀FE-PA92HT(A286)耐熱鋼制長螺紋薄柄T型頭螺栓.等級:900MPa(室溫)/650℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃) |
| BS EN 2933-1996 |
NI-P100HT(鉻鎳鐵合金 718)耐高溫鎳基合金制長螺紋薄柄T型頭螺栓.等級:1275MPa(室溫)/650℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650℃) |
| BS EN 29333-1992 |
牙科用焊料規范 |
(Specification for dental brazing materials) |
| BS EN 2934-1996 |
鍍銀NI-P100HT(鉻鎳鐵合金 718)耐高溫鎳基合金制長螺紋薄柄T型頭螺栓.等級:1275MPa(室溫)/650℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification:1275 MPa (at ambient temperature)/650℃) |
| BS EN 2935-1996 |
NI-P101HT(Waspaloy)耐高溫鎳基合金制長螺紋薄柄T型頭螺栓.等級:1210MPa(室溫)/730℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification:1210 MPa (at ambient temperature)/730 ℃) |
| BS EN 2936-1996 |
鍍銀NI-P101HT(Waspaloy)耐高溫鎳基合金制長螺紋薄柄T型頭螺栓.等級:1210MPa(室溫)/730℃ |
(Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 ℃) |
| BS EN 29367-1-1991 |
滾裝船上汽車?yán)壓凸潭ㄑb置的一般要求.第1部分:商業用車輛和車輛組合.半掛車除外 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Commercial vehicles and combinations of vehicles, semi-trailers excluded) |
| BS EN 29367-2-1994 |
滾裝船上汽車?yán)壓凸潭ㄑb置的一般要求.第2部分:半掛車 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Semi-trailers) |
| BS EN 2937-1994 |
FE-PA92HT(A286)耐高溫鋼制頭部加螺紋六角頭螺釘.等級:900 MPa(室溫)/650℃ |
(Screws, hexagon head, threaded to head in heat resisting steel FE-PA92HT (A286) classification: 900 MPa (at ambient temperature)/650℃) |
| BS EN 2938-1996 |
鍍銀FE-PA92HT(A286)耐高溫鋼制頭部加螺紋六角頭螺釘.等級:900 MPa(室溫)/650℃ |
(Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃) |
| BS EN 2939-1994 |
FE-PA92HT(A 286)耐高溫鋼制頭部加螺紋的翼型十字槽100°埋頭螺釘.等級:900MPa(室溫)/650℃ |
(Screws, 100°countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃) |
| BS EN 294-1992 |
機械安全.上肢可及危險區的安全距離 |
(Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs) |
| BS EN 2940-1996 |
鍍銀FE-PA92HT(A286)耐高熱鋼制頭部加螺紋的翼形十字槽100°埋頭螺釘.等級:900MPa(室溫)/650℃ |
(Screws, 100°countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated - Classification: 900MPa (at ambient temperature)/650℃) |
| BS EN 2942-1998 |
耐熱鎳基合金NI-PH2801(鉻鎳鐵合金X750)鍍銀螺旋形線圈自鎖式螺紋嵌鑲件 |
(Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated) |
| BS EN 2943-1998 |
自鎖緊螺旋盤繞插件.技術規范 |
(Inserts, screw thread, helical coil, self-locking - Technical specification) |
| BS EN 2944-1998 |
耐腐蝕鋼FE-PA3004螺旋形線圈自鎖式螺紋嵌鑲件 |
(Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004) |
| BS EN 2945-1998 |
螺旋形線圈自鎖式螺紋嵌鑲件.組裝程序 |
(Inserts, screw thread, helical coil, self-locking - Assembly procedure) |
| BS EN 29453-1994 |
軟焊錫料合金.化學成分和形狀 |
(Soft solder alloys - Chemical compositions and forms) |
| BS EN 29454-1-1994 |
軟釬焊劑.分類和要求.分類、標簽和包裝 |
(Soft soldering fluxes - Classification and requirements - Classification, labelling and packaging) |
| BS EN 29455-1-1994 |
軟釬焊劑.試驗方法.不揮發物質的測定.重量分析方法 |
(Soft soldering fluxes - Test methods - Determination of non-volatile matter, gravimetric method) |
| BS EN 29455-11-1993 |
軟釬焊劑.試驗方法.第11部分:釬焊劑殘留物的可溶性 |
(Soft soldering fluxes - Test methods - Solubility of flux residues) |
| BS EN 29455-14-1993 |
軟釬焊劑.試驗方法.第14部分:釬焊劑殘留物膠粘度測定 |
(Soft soldering fluxes - Test methods - Assessment of tackiness of flux residues) |
| BS EN 29455-5-1993 |
軟釬焊劑.試驗方法.第5部分:銅鏡試驗 |
(Soft soldering fluxes - Test methods - Copper mirror test) |
| BS EN 29455-8-1993 |
軟釬焊劑.試驗方法.第8部分:鋅含量測定 |
(Soft soldering fluxes - Test methods - Determination of zinc content) |
| BS EN 2948-1997 |
鈍化耐熱鋼制有耳墊圈 |
(Washers, tab, in heat resisting steel, passivated) |
| BS EN 2949-1997 |
鈍化耐腐蝕鋼制有線鎖緊墊圈 |
(Washers, wire locking, in corrosion resisting steel, passivated) |
| BS EN 295-1-1991 |
排水管和下水道用陶管和管配件及管接頭.要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements) |
| BS EN 295-2-1991 |
排水管和下水道用陶管和管配件及管接頭.質量控制和抽樣 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Quality control and sampling) |
| BS EN 295-3-1991 |
排水管和下水道用陶管和管配件及管接頭.試驗方法 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Test methods) |
| BS EN 295-4-1995 |
排水管和下水道用陶管和管配件及管接頭.專用配件、管接頭和配套附件的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for special fittings, adaptors and compatible accessories) |
| BS EN 295-5-1994 |
排水管和下水道用陶管和管配件及管接頭.帶孔的陶管及配件的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for perforated vitrified clay pipes and fittings) |
| BS EN 295-6-1996 |
排水管和下水道用陶管和管配件及管接頭.硫酸鹽粘土入水孔的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes) |
| BS EN 295-7-1996 |
排水管和下水道用陶管和管配件及管接頭.陶管和管插座接縫的要求 |
(Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking) |
| BS EN 29519-1991 |
造船和海上建筑物.標準階梯級 |
(Shipbuilding and marine structures - Rungs for dog-step ladders) |
| BS EN 29539-1992 |
用于氣焊、切割及類似加工過程設備的材料規范 |
(Specification for materials for equipment used in gas welding, cutting and allied processes) |
| BS EN 2955-1993 |
鈦和鈦合金廢料的回收 |
(Recycling of titanium and titanium alloy scrap) |
| BS EN 297-1994 |
燃?xì)饧屑訜徨仩t.裝配有輸入熱量不超過70kW的常壓燃燒器的B |
(Gas-fired central heating boilers - Type BDOWN1DOWN1 and BDOWN1DOWN1DOWNBDOWNS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW) |
| BS EN 29775-1993 |
小船.15KW-40KW功率單外舷電動機遠程操縱系統 |
(Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power) |
| BS EN 298-2003 |
帶或不帶風機的燃?xì)鉅t及燃?xì)庋b置用自動燃?xì)鉅t控制系統 |
(Automatic gas burner control systems for gas burners and gas burning appliances with or without fans) |
| BS EN 2985-1996 |
A型規格的鎳鎘電池 |
(Nickel-cadmium batteries of format A type) |
| BS EN 2986-1996 |
B型規格的鎳鎘電池 |
(Nickel-cadmium batteries of format B type) |
| BS EN 29865-1993 |
紡織品.用邦迪斯門雨淋試驗方法測定織物的防水性 |
(Textiles - Determination of water repellency of fabrics by the Bundesmann rain-shower test) |
| BS EN 2987-1996 |
C型規格的鎳鎘電池 |
(Nickel-cadmium batteries of format C type) |
| BS EN 2988-1996 |
D型規格的鎳鎘電池 |
(Nickel-cadmium batteries of format D type) |
| BS EN 29885-1994 |
廣口玻璃容器.頂部密封表面的平面度偏差.試驗方法 |
(Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods) |
| BS EN 299-1999 |
油壓霧化噴嘴.角度和噴射特性的測定 |
(Oil pressure atomizing nozzles - Determination of the angle and spray characteristics) |
| BS EN 2991-1996 |
E型規格的鎳鎘電池 |
(Nickel-cadmium batteries of format E type) |
| BS EN 2993-1996 |
F型規格的鎳鎘電池 |
(Nickel-cadmium batteries of format F type) |
| BS EN 29945-1-1991 |
信息技術.便攜式操作系統接口(POSIX).系統應用程序接口.C語言 |
Information technology. Portable operating system interface (POSIX). System application program interface (API) [C LANGUAGE] |
| BS EN 2997-1-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.技術規范 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Technical specification) |
| BS EN 2997-10-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.插頭保護涂層.產品標準 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Protective cover for plug - Product standard |
| BS EN 2997-11-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.虛擬插座.產品標 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Dummy receptacle - Product) |
| BS EN 2997-2-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.性能規范和觸點排 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Specification of performanc) |
| BS EN 2997-3-1997 |
連續運行溫度為175℃、200℃尖端溫度為260℃時耐火或不耐火的由螺紋環連接的循環電連接器.方頭法蘭插座.產 |
(Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175 鳦 continuous, 200 鳦 continuous, 260 鳦 peak - Square flange receptacle -) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com