標準號 |
中文名稱 |
英文名稱 |
| EN 12944-3-2001 |
肥料和石灰材料 詞匯 第3部分：與石灰材料相關的術語 |
Fertilizers and liming materials - Vocabulary - Part 3: Terms relating to liming materials |
| EN 12945-2002 |
石灰材料 中和值測定 滴定法 |
Liming materials - Determination of neutralizing value - Titrimetric method |
| EN 12946-2000 |
石灰材料 鈣鎂含量測定 絡合測定法 |
Liming materials - Determination of calcium content and magnesium content - Complexometric method |
| EN 12947-2000 |
石灰材料 鎂含量測定 原子吸收分光光度法 |
Liming materials - Determination of magnesium content - Atomic absorption spectrometric method |
| EN 12948-2002 |
石灰材料 干濕篩分法測定尺寸分布 |
Liming materials - Determination of size distribution by dry and wet sieving |
| EN 1295-1-1997 |
不同荷載條件下地下管道結構設計 第1部分：一般要求 |
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements |
| EN 12951-2004 |
屋頂層用預制附件.長期固定的屋頂梯.產品規范和試驗方法 |
|
| EN 12952-1-2001 |
水管鍋爐及附屬設備 第1部分：總則 |
Water-tube boilers and auxiliary installations - Part 1: General |
| EN 12952-10-2002 |
水管鍋爐及附屬設備 第10部分：抗過壓保護裝置的要求 |
Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure |
| EN 12952-12-2003 |
水管鍋爐和附屬裝置 第12部分：鍋爐供水和鍋爐水質的要求 |
Water tube boilers and auxiliary installations - Part 12: Requirements for boiler feedwater and boiler water quality |
| EN 12952-13-2003 |
水管鍋爐和附屬裝置 第13部分：煙氣凈化系統的要求 |
Water tube boilers and auxillary installations - Part 13: Requirements for flue gas cleaning systems |
| EN 12952-14-2004 |
水管鍋爐和輔助設備.第14部分:使用液壓氨和氨水溶液的廢氣DENOX系統的要求 |
|
| EN 12952-15-2003 |
水管鍋爐及附屬設備 第15部分：驗收試驗 |
Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| EN 12952-16-2002 |
水管鍋爐和附屬裝置 第16部分：鍋爐用固體燃料流化床和層燃系統的要求 |
Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler |
| EN 12952-2-2001 |
水管鍋爐及附屬設備 第2部分：鍋爐及附屬設備的壓力部用材料 |
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| EN 12952-3-2001 |
水管鍋爐及附屬設備 第3部分：壓力部件的設計和計算 |
Water tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts |
| EN 12952-4-2000 |
水管鍋爐及附屬設備 第4部分：在役鍋爐預期壽命計算 |
Water tube boilers and auxiliary installations - Part 4: In-service boiler life expectancy calculations |
| EN 12952-5-2001 |
水管鍋爐及附屬設備 第5部分：鍋爐壓力部件的工藝和構造 |
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| EN 12952-6-2002 |
水管鍋爐及附屬設備 第6部分：建造期間的檢查 鍋爐壓力部件的文檔和標志 |
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| EN 12952-7-2002 |
水管鍋爐及附屬設備 第7部分：鍋爐設備的要求 |
Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler |
| EN 12952-8-2002 |
水管鍋爐及附屬設備 第8部分：鍋爐用液態和氣態燃料燃燒系統的要求 |
Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for boiler |
| EN 12952-9-2002 |
水管鍋爐及附屬設備 第9部分：鍋爐用粉狀固體燃料燃燒系統的要求 |
Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuel for the boiler |
| EN 12953-1-2002 |
殼式鍋爐 第1部分：總則 |
Shell boilers - Part 1: General |
| EN 12953-10-2003 |
殼式鍋爐 第10部分：供水和鍋爐水質的要求 |
Shell boilers - Part 10: Requirements for feedwater and boiler water quality |
| EN 12953-11-2003 |
殼式鍋爐 第11部分：驗收試驗 |
Shell boilers - Part 11: Acceptance tests |
| EN 12953-12-2003 |
殼式鍋爐 第12部分：鍋爐用固體燃料層燃系統的要求 |
Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler |
| EN 12953-2-2002 |
殼式鍋爐 第2部分：鍋爐及附屬設備壓力部件用材料 |
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| EN 12953-3-2002 |
殼式鍋爐 第3部分：壓力部件的設計和計算 |
Shell boilers - Part 3: Design and calculation for pressure parts |
| EN 12953-4-2002 |
殼式鍋爐 第4部分：鍋爐壓力部件的工藝和構造 |
Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler |
| EN 12953-5-2002 |
殼式鍋爐 第5部分：建造期間的檢查 鍋爐壓力零件的文檔和標志 |
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler |
| EN 12953-6-2002 |
殼式鍋爐 第6部分：鍋爐設備的要求 |
Shell boilers - Part 6: Requirements for equipment for the boiler |
| EN 12953-7-2002 |
殼式鍋爐 第7部分：鍋爐用液態和氣態燃料燃燒系統的要求 |
Shell boilers - Part 7: Requirements for firing systems for liquid and gaseous fuels for the boilers |
| EN 12953-8-2001 |
殼式鍋爐 第8部分：抗過壓保護裝置的要求 |
Shell boilers - Part 8: Requirements for safeguards against excessive pressure |
| EN 12954-2001 |
掩埋或浸沒金屬結構的陰極保護 一般原理和管道應用 |
Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines |
| EN 12955-1999 |
食品 谷物、帶殼水果及衍生產品中黃曲霉素B1及黃曲霉素B1、B2、G1和G2總和的測定 帶后柱衍生的高效液相色 |
Foodstuffs - Determination of aflatoxin B1, and the sum of aflatoxins B1, B2, G1 and G2 in cereals, shell-fruits and derived products - High performance liquid chromatographic method with post column Derivatization and Immunoaffinity Column Clear up |
| EN 12957-2001 |
機床 安全性 電動卸料機 |
Machine tools - Safety - Electro discharge machines |
| EN 12958-2000 |
鞋類 鞋底中間狹窄部分的試驗方法 耐疲勞性 |
Footwear - Test methods for shanks - Fatigue resistance |
| EN 12958-2004 |
鞋靴.鞋底中間狹窄部分的試驗方法.抗疲勞性 |
|
| EN 12959-2000 |
鞋類 鞋底中間狹窄部分的試驗方法 縱向硬度 |
Footwear - Test methods for shanks - Longitudinal stiffness |
| EN 1296-2000 |
屋頂材料的防水撓性薄板、 瀝青、塑料和橡膠薄板 長時間暴露在高濕環境下的天然老化方法 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature |
| EN 12960-2001 |
紙和紙板、包裝及一次性衛生產品用粘合劑 抗剪切力的測定 |
Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance |
| EN 12961-2001 |
皮革和制鞋材料用粘合劑 溶劑基和彌散粘合劑優化活化溫度及最大活化壽命的測定 |
Adhesives for leather and footwear materials - Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
| EN 12962-2001 |
粘合劑 液體粘合劑彈性性能測定（“彈性指數”） |
Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
| EN 12963-2001 |
粘合劑 基于合成聚合物的粘合劑中自由單體含量的測定 |
Adhesives - Determination of free monomer content in adhesives based on synthetic polymers |
| EN 12964-2001 |
皮革和制鞋材料用粘合劑 耐久粘合劑 漸升溫度下粘合點耐熱性的測試 |
Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature |
| EN 12965-2003 |
拖拉機和農林機械 動力輸出（PTO）傳動軸及其保護裝置 安全性 |
Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety |
| EN 1297-2004 |
防水用軟薄板.屋頂防水用瀝青、塑料和橡膠薄板.長期暴露于紫外線輻射、高溫和水的組合條件下的人工老化法 |
|
| EN 12970-2000 |
防水瀝青砂膠 定義、要求和試驗方法 |
Mastic asphalt for waterproofing - Definitions, requirements and test methods |
| EN 12971-1-1999 |
加強材料 紡織玻璃纖維碎絲規范 第1部分：名稱 |
Reinforcements - Specification for textile glass chopped strands - Part 1: Designation |
| EN 12971-2-1999 |
加強材料 紡織玻璃纖維碎絲規范 第2部分：試驗方法和一般要求 |
Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements |
| EN 12971-3-1999 |
加強材料 紡織玻璃纖維碎絲規范 第3部分：特殊需求 |
Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements |
| EN 12972-2001 |
危險品運輸罐 金屬罐測試、檢驗和標志 |
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
| EN 12973-2000 |
評價管理 |
Value management |
| EN 12974-1999 |
表面活性劑 采用GLC/凈空法測定烷基-羥乙基-硫酸鹽制品中的1-4-二氧己環含量 |
Surface active agents - Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure |
| EN 12975-1-2000 |
太陽能系統及構件 太陽能收集器 第1部分：一般要求 |
Thermal solar systems and components - Solar collectors - Part 1: General requirements |
| EN 12975-2-2001 |
太陽能系統及構件 太陽能收集器 第2部分：試驗方法 |
Thermal solar systems and components - Solar collectors - Part 2: Test methods |
| EN 12976-1-2000 |
太陽能系統及構件 工廠預制系統 第1部分：一般要求 |
Thermal solar systems and components - Factory made systems - Part 1: General requirements |
| EN 12976-2-2000 |
太陽能系統及構件 工廠預制系統 第2部分：試驗方法 |
Thermal solar systems and components - Factory made systems - Part 2: Test methods |
| EN 12978-2003 |
工業、商業和車庫門和大門 動力開啟門和大門的安全裝置 要求和試驗方法 |
Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
| EN 12979-2002 |
機動車液化石油氣LPG 系統 安裝要求 |
Automotive LPG-systems - Installation requirements |
| EN 1298-1996 |
移動通道和工作塔架 指導手冊編制規則和指南 |
Mobile access and working towers - Rules and guidelines for the preparation of an instruction manual |
| EN 12980-2000 |
接觸食品的材料和物品 飲食業和工業用非金屬物品 測定抗沖擊性的試驗方法 |
Materials and articles in contact with foodstuffs - Non-metallic articles for catering and industrial use - Method of test for the determination of impact resistance |
| EN 12982-2000 |
工業閥門 對接焊端閥端面至端面以及中心至端面的尺寸 |
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| EN 12983-1-2000 |
炊具 在爐、灶或鐵架上使用的家用炊具 第1部分：一般要求 |
Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 1: General requirements |
| EN 12983-1-2004 |
烹飪用具.爐或爐架上使用的家用烹飪用具.第1部分:一般要求 |
|
| EN 1299-1997 |
機械振動和沖擊 機械振動隔離 關于源隔離應用信息 |
Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
| EN 12999-2002 |
升降機 裝載升降機 |
Cranes - Loader cranes |
| EN 12999/A1-2004 |
起重機.負載起重機 |
|
| EN 130-1984 |
測試門的方法 用重復轉矩法測試門合頁的剛度變化 |
Methods of testing doors; Test for the change in stiffness of the door leaves by repeated torsion |
| EN 1300-2004 |
安全存儲裝置.根據保險鎖的耐擅自開啟性對其進行分類 |
|
| EN 13000-2004 |
起重機.移動式起重機 |
|
| EN 13002-2-1999 |
碳纖維紗 第2部分：試驗方法和通用規范 |
Carbon fibre yarns - Part 2: Test methods and general specifications |
| EN 13003-1-1999 |
聚酰胺纖維絲線 第1部分：名稱 |
Para-aramid fibre filament yarns - Part 1: Designation |
| EN 13003-2-1999 |
聚酰胺纖維絲線 第2部分：試驗方法和通用規范 |
Para-aramid fibre filament yarns - Part 2: Methods of test and general specifications |
| EN 13003-3-1999 |
聚酰胺纖維絲線 第3部分：技術規范 |
Para-aramid fibre filament yarns - Part 3: Technical specifications |
| EN 13007-1999 |
鋼桶 標稱容積為20升到60升的帶固定蓋（密封蓋）的桶 |
Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l |
| EN 13008-1999 |
鋼桶 標稱容積為15升到62升的帶可移動蓋（開蓋）的桶 |
Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l |
| EN 13009-2000 |
建筑材料和制品的溫濕性能 吸水膨脹系數的測定 |
Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient |
| EN 1301-1-1997 |
鋁和鋁合金 拉制線材 第1部分：檢查和交貨的技術條件 |
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
| EN 1301-3-1997 |
鋁和鋁合金 拉制線材 第3部分：尺寸和公差 |
Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions |
| EN 13010-2003 |
包裝 單件包裝 顯示板的尺寸和要求 |
Packaging - Unit packaging - Dimensions and requirements for pegboard display |
| EN 130100-1997 |
分規范：金屬箔聚乙烯-對苯二甲酸酯膜介質直流固定電容器 |
Sectional specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current |
| EN 130101-1997 |
空白詳細規范：金屬箔聚乙烯-對苯二甲酸酯膜介質直流固定電容器評定水平E |
Blank detail specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current; Assessment level E |
| EN 130102-1997 |
空白詳細規范：金屬箔聚乙烯-對苯二甲酸酯膜介質直流固定電容器評定水平EZ |
Blank detail specification: Fixed polyethylene-terephtalate film dielectric metal foil capacitors for direct current; Assessment level EZ |
| EN 13011-2000 |
運輸服務 貨物運輸鏈 性能條件聲明系統 |
Transportion services - Good transport chains - System for declaration of performance conditions |
| EN 13012-2001 |
加油站 加油機上使用的自動噴嘴的結構和性能 |
Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| EN 13014-2000 |
與麻醉和呼吸設備相連的氣體采樣管連接器 |
Connections for gas sampling tubes to anaesthetic and respiratory equipment |
| EN 13015-2001 |
電梯和自動扶梯的維護 維護規程 |
Maintenance for lifts and escalators - Rules for maintenance instructions |
| EN 13016-1-2000 |
液體石油制品 蒸汽壓 第1部分：空氣飽和蒸汽壓（ASVP）的測定 |
Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) |
| EN 13016-2-2000 |
液體石油制品 蒸汽壓 第2部分：從40℃到100℃之間的絕對蒸汽壓（AVP）測定 |
Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute vapour pressure (AVP) between 40 Degrees C and 100 Degrees C |
| EN 13017-1-2000 |
實心木板 按表觀分類 第1部分:軟木 |
Solid wood panels - Classification by surface appearance - Part 1: Softwood |
| EN 13017-2-2000 |
實心木板 按表觀分類 第2部分:硬木 |
Solid wood panels - Classification by surface appearance - Part 2: Hardwood |
| EN 13018-2001 |
無損檢測 目測 一般原則 |
Non-destructive testing - Visual testing - General principles |
| EN 13019-2001 |
路面清潔機械 安全要求 |
Machines for road surface cleaning - Safety requirements |
| EN 1302-1999 |
民用水處理用化學品 鋁基凝結劑 分析方法 |
Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods |
| EN 13020-2004 |
路面處理機械.安全要求 |
|
| EN 130200/prA2-1993 |
分規范非固體或固體電解質固定鉭電容器修改prA2 |
Sectional specification; fixed tantalum capacitors with non-solid or solid electrolyte; bump and shock; amendment 2 |
| EN 130202-1998 |
空白詳細規范：非固體電解質多孔陽極鉭固定電容器(子系2) |
Blank detail specification: Fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2) |
| EN 13021-2003 |
冬季服務機械 安全要求 |
Winter service machines - Safety requirements |
| EN 13023-2003 |
印刷、紙張吹煉、造紙機械及附屬設備的噪聲測量法 2類和3類準確度 |
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy categories 2 and 3 |
| EN 13024-1-2002 |
建筑物玻璃 熱固化硼硅酸鹽安全玻璃 第1部分：定義和描述 |
Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description |
| EN 13024-2-2004 |
建筑用玻璃.熱鋼化硼硅酸鹽安全玻璃.第2部分:合格評價/產品標準 |
|
| EN 13025-2000 |
包裝 輕薄金屬包裝 標稱填充容積最大可達40000毫升的圓、柱形和錐形通用金屬容器 |
Packaging - Light gauge metal packaging - Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml |
| EN 13026-2001 |
包裝 輕薄金屬包裝 標稱填充容積最大可達30000毫升的非圓、柱形和錐形通用金屬容器 |
Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml |
| EN 13027-2001 |
包裝 輕薄金屬包裝 根據標稱毛帶蓋容積確定的頂部開口圓罐 |
Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity |
| EN 13028-2001 |
包裝 輕薄金屬包裝 根據標稱填充容積確定的加或不加氣飲品用頂部開口圓罐 |
Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes |
| EN 13029-2001 |
包裝 輕薄金屬包裝 插入式塑料封閉開口 |
Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures |
| EN 1303-1998 |
建筑五金器具 鎖用圓柱體 要求和試驗方法 |
Building hardware - Cylinders for locks - Requirements and test methods |
| EN 13030-2001 |
建筑物通風 終端設備 模擬雨下天窗的性能試驗 |
Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain |
| EN 130300-1998 |
分規范：固體和非固體電解質鋁電解質電容器 |
Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte |
| EN 130301-2002 |
空白詳細規范：非固體電解質鋁電解質電容器 |
Blank detail specification: Aluminium electrolytic capacitors with non-solid electrolyte |
| EN 13031-1-2001 |
溫室 設計和建造 第1部分： 商用溫室 |
Greenhouses - Design and construction - Part 1: Commercial production greenhouses |
| EN 13032-1-2004 |
燈和照明.燈和燈具光度數據的測量和表示.第1部分:測量和文件格式 |
|
| EN 13035-3-2003 |
平板玻璃制造、處理和加工用機械和設備 安全要求 第3部分：裁剪機 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines |
| EN 13035-4-2003 |
平板玻璃制造、處理和加工用機械和設備 安全要求 第4部分：傾斜臺 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables |
| EN 13036-1-2001 |
公路和機場地面特性 試驗方法 第1部分：采用體積測量補綴技術法測量路面宏觀結構深度 |
Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| EN 13036-3-2002 |
道路和機場地面特性 試驗方法 第3部分：路面水平排水能力測定 |
Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability |
| EN 13036-4-2003 |
道路和機場地面特性 試驗方法 第4部分：路面防滑性測定方法 擺錘試驗 |
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
| EN 13036-7-2003 |
道路和機場地面特性 試驗方法 第7部分：路面線路單向不規則性測量 直邊試驗 |
Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses; The straightedge test |
| EN 13037-1999 |
土壤改良劑和生長基 PH值的測定 |
Soil improvers and growing media - Determination of pH |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com