標準號 |
中文名稱 |
英文名稱 |
| DIN EN ISO 8289-2001 |
釉瓷和搪瓷.檢測和確定缺陷位置的低電壓試驗 |
Vitreous and porcelain enamels - Low voltage test for detecting and locating defects (ISO 8289:2000); German version EN ISO 8289:2001 |
| DIN EN ISO 8290-1998 |
釉瓷和搪瓷.室溫下抗硫酸的測定 |
Vitreous and porcelain enamels - Determination of resistance to sulfuric acid at room temperature (ISO 8290:1998); German version EN ISO 8290:1998 |
| DIN EN ISO 8292-1995 |
動植物脂肪和油.固態脂肪含量的測定.脈沖核磁共振法 |
Animal and vegetable fats and oils - Determination of solid fat content - Pulsed nuclear magnetic resonance method (ISO 8292:1991); German version EN ISO 8292:1995 |
| DIN EN ISO 8294-1999 |
動植物的脂肪和油.銅、鐵和鎳含量的測定.石墨熔爐原子吸收法 |
Animal and vegetable fats and oils - Determination of copper, iron and nickel contents - Graphite furnace atomic absorption method (ISO 8294:1994); German version EN ISO 8294:1999 |
| DIN EN ISO 8295-2004 |
塑料.薄膜和薄板.摩擦系數的測定 |
|
| DIN EN ISO 8307-1998 |
軟泡沫塑料聚合材料.回跳彈性的測定 |
Flexible cellular polymeric materials - Determination of resilience (ISO 8307:1990); German version EN ISO 8307:1997 |
| DIN EN ISO 8308-1996 |
帶和不帶填料的橡膠和塑料軟管及管系.軟管和管壁的透液量的測定 |
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993); German version EN ISO 8308:1995 |
| DIN EN ISO 8311-1996 |
輕質碳氫化合物制冷液.船上薄膜式罐和柱型罐的標定.物理測量法 |
Refrigerated light hydrocarbon fluids - Calibration of membrane tanks and independent prismatic tanks in ships - Physical measurement (ISO 8311:1989); German version EN ISO 8311:1995 |
| DIN EN ISO 8316-1995 |
封閉管道內液體流量的測量.容積測量箱的液體收集法 |
Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987); German version EN ISO 8316:1995 |
| DIN EN ISO 8317 Berichtigung 1-2005 |
防兒童拆開的包裝.可再次包裝件的要求和試驗程序 |
|
| DIN EN ISO 8317-2004 |
防兒童拆開的包裝.可再次包裝的要求和試驗程序 |
|
| DIN EN ISO 8318-2002 |
包裝.完滿運輸包裝和成組裝運.采用可變頻的正弦振動試驗 |
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000); German version EN ISO 8318:2002 |
| DIN EN ISO 8320-1-2004 |
接觸鏡片和接觸鏡片護理產品.詞匯.第2部分:接觸鏡片 |
(Contact lenses and contact lens care products - Vocabulary - Part 1: Contact lenses (ISO 8320-1:2003); German version EN ISO 8320-1:2003) |
| DIN EN ISO 8320-1-2004 |
接觸鏡片和接觸鏡片護理產品.詞匯.第2部分:接觸鏡片 |
|
| DIN EN ISO 8320-2-2001 |
接觸鏡片和接觸鏡片護理產品.詞匯.第2部分:接觸鏡片護理產品 |
Contact lenses and contact lens care products - Vocabulary - Part 2: Contact lens care products (ISO 8320-2:2001); German version EN ISO 8320-2:2001 |
| DIN EN ISO 8321-1-2003 |
眼科光學.接觸透鏡的材料、光學和尺寸性能規范.第1部分:剛性角膜接觸透鏡和鞏膜接觸透鏡 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 1: Rigid corneal and scleral contact lenses (ISO 8321-1:2002); German version EN ISO 8321-1:2002 |
| DIN EN ISO 8321-2-2000 |
光學和光學儀器.接觸透境材料,光學特性和尺寸特性規范.第2部分:單視水晶透鏡 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 2: Single-vision hydrogel lenses (ISO 8321-2:2000); German version EN ISO 8321-2:2000 |
| DIN EN ISO 8325-2004 |
牙醫學.旋轉儀器的試驗方法 |
|
| DIN EN ISO 8330-2000 |
橡膠和塑料軟管和軟管組件.詞匯表 |
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998); German version EN ISO 8330:2000 |
| DIN EN ISO 8351-1-1996 |
包裝.袋包裝規格方法.第1部分:紙袋 |
Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994); German version EN ISO 8351-1:1996 |
| DIN EN ISO 8351-2-1996 |
包裝.袋包裝規格方法.第2部分:熱塑軟薄膜制成的包裝袋 |
Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994); German version EN ISO 8351-2:1996 |
| DIN EN ISO 8359-1997 |
醫用氧氣濃縮器.安全要求 |
Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996); German version EN ISO 8359:1996 |
| DIN EN ISO 8362-1-2004 |
注射容器及附件.第1部分:玻璃管注射瓶 |
|
| DIN EN ISO 8362-4-2004 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
|
| DIN EN ISO 8367-1-1996 |
包裝.一般用途袋子的尺寸公差.第1部分:紙袋 |
Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993); German version EN ISO 8367-1:1996 |
| DIN EN ISO 8367-2-1996 |
包裝.一般用途袋子的尺寸公差.第2部分:熱塑塑料薄膜袋 |
Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993); German version EN ISO 8367-2:1996 |
| DIN EN ISO 8373-1996 |
操作工業機器人.詞匯 |
Manipulating industrial robots - Vocabulary (ISO 8373:1994); German version EN ISO 8373:1996 |
| DIN EN ISO 8381-2000 |
以奶為基料的嬰兒食品.脂肪含量的測定.重量分析法(參照法) |
Milk-based infant foods - Determination of fat content - Gravimetric method (Reference method) (ISO 8381:2000); German version EN ISO 8381:2000 |
| DIN EN ISO 8384-2001 |
船和航運技術.挖泥船.詞匯 |
Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2000); Trilingual version EN ISO 8384:2001 |
| DIN EN ISO 8385-2000 |
船和海船術語.挖泥船.分類 |
Ships and marine technology - Dredgers - Classification (ISO 8385:1999); German version EN ISO 8385:1999 |
| DIN EN ISO 8401-1995 |
金屬鍍層.延展性的測量方法述評 |
Metallic coatings - Review of methods of measurement of ductility (ISO 8401:1986); German version EN ISO 8401:1994 |
| DIN EN ISO 8420-2002 |
動植物脂肪和油.極性化合物含量測定 |
Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002); German version EN ISO 8420:2002 |
| DIN EN ISO 8429-1996 |
光學和光學儀器.眼科學.分度盤刻度 |
Optics and optical instruments - Ophthalmology - Graduated dial scale (ISO 8429:1986); German version EN ISO 8429:1996 |
| DIN EN ISO 8434-1-1997 |
液壓傳動和一般用金屬導管連接件.第1部分:24度喇叭形壓合接頭 |
Metallic tube connections for fluid power and general use - Part 1: 24?compression fittings (ISO 8434-1:1994); German version EN ISO 8434-1:1997 |
| DIN EN ISO 8434-4-2000 |
液壓及通用金屬管件連接.第4部分:以O(shè)形密封圈焊接于接頭上的24度圓錐體連接件 |
Metallic tube connections for fluid power and general use - Part 4: 24?cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000 |
| DIN EN ISO 8442-1-1998 |
和食品接觸的材料及物品.刀具和餐桌器具.第1部分:準備餐食用刀具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 1: Requirements for cutlery for the preparation of food (ISO 8442-1:1997); German version EN ISO 8442-1:1997 |
| DIN EN ISO 8442-2-1998 |
和食品接觸的材料及物品.刀具和餐桌器具.第2部分:鍍銀和不銹鋼餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997); German version EN ISO 8442-2:1997 |
| DIN EN ISO 8442-3-1998 |
與食品接觸的材料和物品.刀具和餐桌器皿.第3部分:鍍銀餐桌器皿和裝飾凹型器皿 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 3: Requirements for silver-plated table and decorative holloware (ISO 8442-3:1997); German version EN ISO 8442-3:1997 |
| DIN EN ISO 8442-4-1998 |
和食品接觸的材料及物品.刀具和餐桌器具.第4部分:鍍金餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 4: Requirements for gold plated cutlery (ISO 8442-4:1997); German version EN ISO 8442-4:1997 |
| DIN EN ISO 8442-6-2001 |
與食品接觸的材料和物品.刀叉餐具和凹型餐具.第6部分:薄鍍銀的由清漆保護的餐桌凹形餐具 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000 |
| DIN EN ISO 8442-7-2001 |
與食品接觸的材料和物品.刀叉餐具和凹形餐具.第7部分:由銀、其他貴金屬及其合金制成的刀叉餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000 |
| DIN EN ISO 8442-8-2001 |
與食品接觸的材料和物品.刀叉餐具和凹形餐具.第8部分:銀制餐桌餐具和裝飾性凹形餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000 |
| DIN EN ISO 845-1995 |
泡沫橡膠和塑料.表觀密度的測定 |
Cellular plastics and rubbers - Determination of apparent (bulk) density (ISO 845:1988); German version EN ISO 845:1995 |
| DIN EN ISO 846-1997 |
塑料.微生物作用的評價 |
Plastics - Evaluation of the action of microorganisms (ISO 846:1997); German version EN ISO 846:1997 |
| DIN EN ISO 8467-1995 |
水質.高錳酸鹽指數的測定 |
Water quality - Determination of permanganate index (ISO 8467:1993); German version EN ISO 8467:1995 |
| DIN EN ISO 8469 Berichtigung 1-2001 |
DIN EN ISO 8469-1995的勘誤 |
Corrigendum to DIN EN ISO 8469:1995 (German version EN ISO 8469:1995/A1:2000) |
| DIN EN ISO 8469-1995 |
小艇.不耐火的燃料軟管 |
Small craft - Non-fire-resistant fuel hoses (ISO 8469:1994); German version EN ISO 8469:1995 |
| DIN EN ISO 8491-2004 |
金屬材料.管(全截面).彎曲試驗 |
|
| DIN EN ISO 8492-2004 |
金屬材料.管.壓扁試驗 |
|
| DIN EN ISO 8493-2004 |
金屬材料.管.擴口試驗 |
|
| DIN EN ISO 8494-2004 |
金屬材料.管.卷邊試驗 |
|
| DIN EN ISO 8495-2004 |
金屬材料.管.環形擴口試驗 |
|
| DIN EN ISO 8496-2004 |
金屬材料.管.環形拉伸試驗 |
|
| DIN EN ISO 8497-1996 |
絕熱.管道用絕熱穩定狀態中熱傳輸性能測定 |
Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994); German version EN ISO 8497:1996 |
| DIN EN ISO 8501-1 Bb.1-2002 |
涂料和有關產品使用之前鋼襯底的預處理.表面清潔度的目視評定.對第1部分的信息性補充:不同磨料噴射清理所致鋼材表觀改變的典型樣板照片(ISO 8501-1:1988/補充:1994) |
|
| DIN EN ISO 8501-1-2002 |
涂料和有關產品使用之前鋼襯底的預處理.表面清潔度的目視評定.第1部分:未涂裝的鋼材和全面清除原有涂層后的鋼材的銹蝕等級和除銹等級(ISO 8501-1:1988) |
|
| DIN EN ISO 8501-2-2002 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第2部分:已有覆層局部除去后已涂覆鋼襯底的制備等級 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994); |
| DIN EN ISO 8502-2-1999 |
涂層材料使用前的鋼料表面的清理準備.表面清潔度的檢驗.第2部分:已清潔的表面上氯化物的實驗室測定 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992); German version EN ISO 8502-2:1999 |
| DIN EN ISO 8502-3-1999 |
涂層材料使用前的鋼料表面的清理準備.表面清潔度評定的檢驗.第3部分:為涂層作準備的鋼表面上灰塵的評定(粘合帶法) |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992); Ge |
| DIN EN ISO 8502-4-1999 |
涂層材料使用前的鋼料表面的清理準備.表面清潔度評定的檢驗.第4部分:涂層前出現露水可能性的評估指南 |
|
| DIN EN ISO 8502-6-1999 |
涂層材料使用前的鋼料表面的清理準備.表面清潔度評定的檢驗.第6部分:分析用可溶于水的雜質的萃取,布雷斯勒法(Bresle) |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis; the Bresle method (ISO 8502-6:1995); German version EN ISO 8502- |
| DIN EN ISO 8502-9-2001 |
涂料和有關產品使用前鋼襯底的制備.表面清潔度評定試驗.第9部分:水溶性鹽熱導測定的現場方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998); German version EN ISO |
| DIN EN ISO 8503-1-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第1部分:噴砂處理表面的 ISO評定比較樣板的規范和定義 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra |
| DIN EN ISO 8503-2-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第2部分:噴砂處理表面的定級方法.比較方 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel; comparator proced |
| DIN EN ISO 8503-3-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第3部分:ISO表面輪廓比較儀的校準方法和 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s |
| DIN EN ISO 8503-4-1995 |
涂料和有關產品使用前的鋼襯底的制備.噴丸處理鋼基體的表面粗糙度.第4部分:ISO表面輪廓比較儀的校準方法和 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s |
| DIN EN ISO 8504-1-2002 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第1部分:總則 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000); German version EN ISO 8504-1:2001) |
| DIN EN ISO 8504-2-2002 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第2部分:噴砂清理 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000); German version EN ISO 8504-2:2001) |
| DIN EN ISO 8504-3-2002 |
涂料和有關產品使用前鋼襯底的制備.表面制備方法.第3部分:手工工具和電動工具清洗 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993); German version EN ISO 8504-3:2001) |
| DIN EN ISO 8536-1-2004 |
醫用輸液設備.第1部分:輸液玻璃瓶 |
|
| DIN EN ISO 8536-2 Berichtigung 1-2005 |
醫用輸液設備.第2部分:輸液瓶塞.DIN EN ISO 8536-2-2003的勘誤 |
|
| DIN EN ISO 8536-2-2003 |
醫用輸液設備.第2部分:輸液瓶塞 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2001); German version EN ISO 8536-2:2002, German and English texts |
| DIN EN ISO 8536-8-2005 |
醫用輸液器具.第8部分:有壓力輸液儀的輸液器具 |
|
| DIN EN ISO 8537-2001 |
胰導素注射用的有或無針頭的滅菌一次性使用注射器. |
Sterile single-use syringes, with or without needle, for insulin (ISO 8537:1991) (including Amendment AMD 1:2000); German version EN ISO 8537:1994 + A1:2000 |
| DIN EN ISO 8561-1996 |
家用無霜制冷設備.強制循環冷卻的冰箱,制冷機,冷凍機和低溫制冷機.性能和測試方法 |
Household frost-free refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation - Characteristics and test methods (ISO 8561:1995); German version EN ISO 8561:1 |
| DIN EN ISO 8561/A1-1998 |
家用無霜制冷設備.制冷機,制冷機冷藏柜,冷凍食品儲藏柜和用內壓力空氣循環冷卻的食品冷藏柜特性和試驗方法.補充件1:強易腐蝕品防腐用特殊冷凍箱 |
|
| DIN EN ISO 8565-1995 |
金屬和合金.大氣腐蝕試驗.野外試驗的一般要求 |
Metals and alloys - Atmospheric corrosion testing - General requirements for field tests (ISO 8565:1992); German version EN ISO 8565-1995 |
| DIN EN ISO 8580-1995 |
橡膠和塑料軟管.穩定狀態下抗紫外線的測定 |
(Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987); German version EN ISO 8580:1995) |
| DIN EN ISO 8596-1996 |
眼科光學.視力檢驗.標準視力符號及其演示 |
(Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation (ISO 8596:1994); German version EN ISO 8596:1996) |
| DIN EN ISO 8597-1996 |
眼科光學.視力檢驗.視力符號相關連接方法 |
(Optics and optical instruments - Visual acuity testing - Method of correlating optotypes (ISO 8597:1994, including Technical Corrigendum 1:1995); German version EN ISO 8597:1996) |
| DIN EN ISO 8598-1998 |
光學和光學儀器.焦距計 |
(Optics and optical instruments - Focimeters (ISO 8598:1996); Deutsche Fassung EN ISO 8598:1998) |
| DIN EN ISO 8599-1997 |
光學和光學儀器.接觸鏡片.光譜透射率和光透射率的測定 |
Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance (ISO 8599:1994); German version EN ISO 8599:1996 |
| DIN EN ISO 8611-1-2004 |
物料搬運用托盤.平托盤.第1部分:試驗方法 |
|
| DIN EN ISO 8612-2001 |
眼科裝置.眼壓計 |
Ophthalmic instruments - Tonometers (ISO 8612:2001); German version EN ISO 8612:2001 |
| DIN EN ISO 8618-1998 |
塑料.液態酚醛樹脂.非揮發性物質的常規測定 |
Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter (ISO 8618:1995); German version EN ISO 8618:1998 |
| DIN EN ISO 8619-1998 |
塑料.酚醛樹脂粉.在加熱玻璃板上流動距離的測定 |
Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:1995); German version EN ISO 8619:1998 |
| DIN EN ISO 8624-2002 |
眼科光學.眼鏡架.測量系統和術語 |
Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO 8624:2002); German version EN ISO 8624:2002 |
| DIN EN ISO 8655-1-2002 |
活塞式容量測量儀器.第1部分:術語、一般要求和用戶使用建議 |
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2002); German version EN ISO 8655-1:2002 |
| DIN EN ISO 8655-2-2002 |
活塞式容量測量儀器.第2部分:活塞式吸量管 |
Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002); German version EN ISO 8655-2:2002 |
| DIN EN ISO 8655-3-2002 |
活塞式容量測量儀器.第3部分:活塞式玻璃量管 |
Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002); German version EN ISO 8655-3:2002 |
| DIN EN ISO 8655-4-2002 |
活塞式容量測量儀器.第4部分:稀釋器 |
Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002); German version EN ISO 8655-4:2002 |
| DIN EN ISO 8655-5-2002 |
活塞式容量測量儀器.第5部分:分配器 |
Piston-operated volumetric apparatus - Part 5: Dispenser (ISO 8655-5:2002); German version EN ISO 8655-5:2002 |
| DIN EN ISO 8655-6-2002 |
活塞式容量測量儀器.第6部分:確定測量誤差的重量分析法 |
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002); German version EN ISO 8655-6:2002 |
| DIN EN ISO 8655-7-2005 |
活塞式容量測量儀器.第7部分:評估設備性能用非重量測量法(ISO 8655-1-2005); 德文版本 EN ISO 8655-1-2005 |
|
| DIN EN ISO 8662-10 Berichtigung 1-2002 |
DIN EN ISO 8662-10:1999-04 (EN ISO 8662-10:1998/AC:2002)勘誤 |
Corrigenda to DIN EN ISO 8662-10:1999-04 (EN ISO 8662-10:1998/AC:2002) |
| DIN EN ISO 8662-10-1999 |
手提電動工具.手柄振動測量.第10部分:步?jīng)_輪廓機和剪切機械 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears (ISO 8662-10:1998); German version EN ISO 8662-10:1998 |
| DIN EN ISO 8662-12-1997 |
便攜式手提動力工具.手柄振動測量.第12部分:有往復作用的鋸和銼和有擺動或旋轉作用的鋸 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997); German version EN ISO 8662-12:1997 |
| DIN EN ISO 8662-13 Berichtigung 1-1999 |
對DIN EN ISO 8662-13:1997-10的校正 |
Corrigenda to DIN EN ISO 8662-13:1997-10 (EN ISO 8662-13:1997/AC:1998) |
| DIN EN ISO 8662-13-1997 |
便攜式手提動力工具.手柄振動測量.第13部分:模具研模機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997); German version EN ISO 8662-13:1997 |
| DIN EN ISO 8662-14-1997 |
便攜式手提動力工具.手柄機械振動的測量.第14部分:石料加工機和針式標定器 |
Hand-held portable power tools; measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996); German version EN ISO 8662-14:1996 |
| DIN EN ISO 8662-4-1995 |
便攜式手提動力工具.手柄振動的測量.第4部分:磨床 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994); German version EN ISO 8662-4:1995 |
| DIN EN ISO 8662-6-1995 |
便攜式手提動力工具.手柄振動的測量.第6部分:沖擊式鉆機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994); German version EN ISO 8662-6:1995 |
| DIN EN ISO 8662-7-1997 |
便攜式手提動力工具.手柄振動測量.第7部分:扳手,旋具與具有沖擊,沖力和刻踞齒作用的螺紋滾子 |
Hand-held portable power tools - Measurement of vibration at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or rachet action (ISO 8662-7:1997); German version EN ISO 8662-7:1997 |
| DIN EN ISO 8662-8-1997 |
便攜式手提動力工具.手柄振動測量.第8部分:拋光和旋轉,軌道和隨機軌道砂輪機 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997); German version EN ISO 8662-8:1997 |
| DIN EN ISO 8662-9-1997 |
便攜式手提動力工具.手柄振動的測量.第9部分:夯實機 |
Hand-held portable power tools; measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996); Deutsche Fassung EN ISO 8662-9:1996 |
| DIN EN ISO 8665 Berichtigung 1-2001 |
DIN EN ISO 8665-1995的勘誤 |
Corrigendum to DIN EN ISO 8665:1995 (German version EN ISO 8665:1995/A1:2000) |
| DIN EN ISO 8665-1995 |
小型船舶.船舶驅動電動機和裝置.功率測量和說明 |
Small craft - Marine propulsion engines and systems - Power measurements and declarations (ISO 8665:1994); German version EN ISO 8665:1995 |
| DIN EN ISO 8666-2003 |
小艇.主要數據 |
Small craft - Principal data (ISO 8666:2002); German version EN ISO 8666:2002 |
| DIN EN ISO 8669-2-1997 |
尿收集袋.第2部分:要求和試驗方法 |
Urine collection bags - Part 2: Requirements and test methods (ISO 8669-2:1996); German version EN ISO 8669-2:1996 |
| DIN EN ISO 8670-2-1997 |
造口術收集袋.第2部分:要求和試驗方法 |
Ostomy collection bags - Part 2: Requirements and test methods (ISO 8670-2:1996); German version EN ISO 8670-2:1996 |
| DIN EN ISO 8673-2001 |
有米制細牙螺紋的1型六角螺母.產品等級A和B |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999); German version EN ISO 8673:2000 |
| DIN EN ISO 8674-2001 |
有米制細牙螺紋的2型六角螺母.產品等級A和B |
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999); German version EN ISO 8674:2000 |
| DIN EN ISO 8675-2001 |
有米制細牙螺紋的六角薄螺母(倒角).產品等級A和B |
Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B (ISO 8675:1999); German version EN ISO 8675:2000 |
| DIN EN ISO 8676-2001 |
有米制細牙螺紋的六角頭螺釘.產品等級A和B |
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999); German version EN ISO 8676:2000 |
| DIN EN ISO 868-1998 |
塑料和硬質橡膠.用硬度計測定壓痕硬度(肖氏硬度) |
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985); German version EN ISO 868:1997 |
| DIN EN ISO 8689-1-2000 |
水質.江河的生物分類.第1部分:對海底大型無脊椎動物調查的生物質量數據的解釋指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000); German version EN ISO 8689-1:2000 |
| DIN EN ISO 8689-2-2000 |
水質.江河的生物分類.第2部分:對海底大型無脊椎動物調查的生物質量數據的表示指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000); German version EN ISO 8689-2:2000 |
| DIN EN ISO 8692-2005 |
水質.用單細胞綠藻進行淡水藻類生長抑制性試驗 |
|
| DIN EN ISO 8728-1999 |
造船和航海技術.航海用陀螺羅盤 |
Ships and marine technology - Marine gyro-compasses (ISO 8728:1997); German version EN ISO 8728:1998 |
| DIN EN ISO 8729-1999 |
造船和航海技術.海上雷達反光鏡 |
Ships and marine technology - Marine radar reflectors (ISO 8729:1997); German version EN ISO 8729:1998 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com