標準號 |
中文名稱 |
英文名稱 |
| EN 1748-1-1-2004 |
建筑玻璃.特種基礎產品.硼硅酸鹽玻璃.第1-1部分:定義和一般物理和機械性能 |
|
| EN 1748-1-1997 |
建筑玻璃 專用基本產品 第1部分：硼硅酸鹽玻璃 |
Glass in building - Special basic products - Part 1: Borosilicate glasses |
| EN 1748-1-2-2004 |
建筑用玻璃.特種基礎產品.硼硅酸鹽玻璃.第1-2部分:合格評價/產品標準 |
|
| EN 1748-2-1-2004 |
建筑玻璃.特種基礎產品.玻璃陶瓷.第2-1部分:定義和一般物理和機械性能 |
|
| EN 1748-2-1997 |
建筑玻璃 專用基本產品 第2部分：玻璃陶瓷 |
Glass in building - Special basic products - Part 2: Glass ceramics |
| EN 1748-2-2-2004 |
建筑用玻璃.特種基礎產品.玻璃陶瓷.第2-2部分:合格評價/產品標準 |
|
| EN 175-1997 |
個人防護 焊接和類似加工中眼睛和面部的防護設備 |
Personal protection - Equipment for eye and face protection during welding and allied processes |
| EN 1751-1998 |
建筑物通風 氣路終端設備 閥與閥門的氣動試驗 |
Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves |
| EN 175101-802-1999 |
詳細規范：帶有3或4排2.54mm基本網格的許多接觸件的印制板用兩件式連接器 |
Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| EN 175101-809-1999 |
詳細規范：經質量評定的符合CECC75101-801的帶有短結構2.54mm網格的印制板用兩件式連接器 |
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75101-801, with assessed quality |
| EN 175101-809-2004 |
詳細規范.短結構符合CECC 75101-801的經質量評定的有2.54mm格柵的印制板用兩件式連接器 |
|
| EN 175200-1996 |
分規范：圓形連接器 |
Sectional specification: Circular connectors |
| EN 175201-804-1999 |
詳細規范：圓形連接器螺紋接頭直徑為1.6mm的圓接觸件 |
Detail specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling |
| EN 175300-1996 |
分規范：頻率在3MHz以下的矩形連接器 |
Sectional specification: Rectangular connectors for frequencies below 3 MHz |
| EN 175301-801-1999 |
詳細規范：圓形可拆卸壓接型接觸件高密度矩形連接器 |
Detail specification: High density rectangular connectors, round removable crimp contacts |
| EN 175301-803-1999 |
詳細規范：矩形連接器帶不可拆卸鎖定螺釘?shù)暮穸葹?.8mm的偏平接觸件 |
Detail specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable |
| EN 1754-1997 |
鎂和鎂合金 鎂和鎂合金氧化極、鑄錠和鑄件命名體系 |
Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system |
| EN 1755-2000 |
工業用卡車的安全 潛在爆炸環境下的操作 在可燃氣體、蒸氣、 潮濕和灰塵中使用 |
Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
| EN 175500-1997 |
分規范：包括批準和能力批準的連接器用電纜引出端附件 |
Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval |
| EN 1756-1-2001 |
后置升降裝置 安裝在用輪子行駛的車輛上的平臺式升降裝置 安全要求 第1部分：貨物用后置升降裝置 |
Tail lifts - Platform lifts for mounting on wheeled vehicles; Safety requirements - Part 1: Tail lifts for goods |
| EN 1756-2-2004 |
尾部提升機.輪式車輛上安裝的平臺式提升機.安全要求.第2部分:乘客用尾部提升機 |
|
| EN 1757-1-2001 |
工業卡車的安全性 非專業人員用貨車 第1部分：堆貨手推車 |
Safety of industrial trucks - Pedestrian propelled trucks - Part 1: Stacker trucks |
| EN 1757-2-2001 |
工業卡車的安全性 非專業人員用貨車 第2部分：手推叉車 |
Safety of industrial trucks - Pedestrian propelled trucks - Part 2: Pallet trucks |
| EN 1757-3-2002 |
工業卡車的安全性 非專業人員手控和半手控卡車 第3部分：站臺車 |
Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks |
| EN 1757-4-2003 |
工業卡車的安全性 人力推進裝卸車 第4部分：帶杠桿升降的手推叉車 |
Safety of industrial trucks - Pedestrian propelled trucks - Part 4: Scissor lift pallet-trucks |
| EN 1758-1997 |
銅及銅合金 引線架用帶材 |
Copper and copper alloys - Strip for lead frames |
| EN 1759-1-2004 |
法蘭及其連接件.等級標示的管、閥、配件和附件用圓形法蘭.第1部分:鋼法蘭.NPS 1/2至24 |
|
| EN 1759-3-2003 |
法蘭及其接頭 管材、閥門、管件及附件用已命名種類的圓形法蘭 第2部分：銅合金法蘭 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy flanges |
| EN 1759-3-2004 |
法蘭及其接頭.等級標示的管、閥、配件和附件用圓形法蘭.第3部分:銅合金法蘭 |
|
| EN 1759-4-2003 |
法蘭及其接頭 管材、閥門、管件及附件用已命名種類的圓形法蘭 第4部分：鋁合金法蘭 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
| EN 176-1991 |
具低吸水率的粉末擠壓陶瓷瓷磚（E ≤3%） BI組 |
Dust-pressed ceramic tiles with a low water absorption (E≤3 %) - Group BI |
| EN 1760-1-1997 |
機械安全 壓敏防護裝置 第1部分：壓敏墊和壓敏地板的設計和試驗的一般原則 |
Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 1760-2-2001 |
機械安全 壓敏防護裝置 第2部分：壓敏邊緣和壓敏棒設計和試驗的一般原則 |
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 1760-3-2004 |
機器的安全性.壓敏保護裝置.第3部分:壓敏減震器、壓敏板、壓敏線和類似設備的設計和試驗的一般準則 |
|
| EN 1761-1999 |
燃料卡車送貨用的橡膠軟管和軟管組件 規范 |
Rubber hoses and hose assemblies for fuel truck delivery - Specification |
| EN 1762-1997 |
氣壓為25bar(2.5MPa)及以下的液化石油氣LPG(液相或氣相)及天然氣用橡膠軟管和軟管組件 規范 |
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| EN 1765-1997 |
油的吸放裝置用橡膠軟管組裝件 組裝件規范 |
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| EN 1765-2004 |
油的吸放設備用橡膠軟管組件.組件規范 |
|
| EN 1766-2000 |
混凝土結構防護和修理用產品和系統 試驗方法 試驗用基準混凝土 |
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
| EN 1767-1999 |
混凝土結構防護和修理用的產品和系統 試驗方法 紅外分析 |
Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
| EN 177-1991 |
具吸水率3% |
Dust-pressed ceramic tiles with a water absorption of 3 % |
| EN 1770-1998 |
混凝土結構防護和修理用的產品和系統 試驗方法 熱膨脹系數的測定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion |
| EN 1771-2004 |
混凝土結構的保護和修復用產品和系統.試驗方法.使用沙柱試驗測定可注入性 |
|
| EN 1772-2000 |
表面活性劑 用浸漬法測定潤濕力(ISO 8022-1990修正) |
Surface active agents - Determination of wetting power by immersion (ISO 8022:1990, modified) |
| EN 1773-1996 |
紡織品 織物 寬度和長度測定 |
Textiles - Fabrics - Determination of width and length |
| EN 1774-1997 |
鋅和鋅合金 鑄造用合金 鑄錠和鑄液 |
Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid |
| EN 1776-1998 |
供氣 天然氣測量站 功能要求 |
Gas supply systems - Natural gas measuring stations - Functional requirements |
| EN 1777-2004 |
消防和救援設備用液壓平臺.安全要求和檢驗 |
|
| EN 1778-1999 |
焊接熱塑結構特性值 熱塑設備設計的允許應力和模量的測定 |
Characteristic values for welded thermoplastic constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment |
| EN 1779-1999 |
無損檢驗 漏泄試驗 方法和技術選擇標準 |
Non-destructive testing - Leak testing - Criteria for method and technique selection |
| EN 178-1991 |
具吸水率6% |
Dust-pressed ceramic tiles with a water absorption of 6 % |
| EN 1780-1-2002 |
鋁和鋁合金 再熔化母合金和鑄件用合金鋁鑄錠標識 第1部 分：數字標識體系 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN 1780-2-2002 |
鋁和鋁合金 再熔化母合金及鑄件用合金鋁鑄錠標識 第2部分：基于化學符號標識體系 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| EN 1780-3-2002 |
鋁和鋁合金 再熔化母合金及鑄件用合金鋁鑄錠標識 第1部分：數字標識體系 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical compositon |
| EN 1782-1998 |
氣管導管和連接器 |
Tracheal tubes and connectors |
| EN 1784-2003 |
食品 經過輻射含脂肪的食品的檢測 碳氫化合物的氣相色譜分析 |
Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic analysis of hydrocarbons |
| EN 1785-2003 |
食品 經過輻射含脂肪的食品的檢測 二烷基環丁酮的氣相色譜/質譜分析 |
Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones |
| EN 1786-1996 |
食品 含骨輻射食品的檢測 ESR法 |
Foodstuffs - Detection of irradiated food containing bone - Method by ESR spectroscopy |
| EN 1787-2000 |
食物 用ESR法檢測含纖維素經過輻射的食品 |
Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy |
| EN 1788-2001 |
食品 硅酸鹽礦物可與其分隔的輻射食品的熱致發光檢測 |
Foodstuffs - Thermoluminescence detection of irradiated food from which silicate minerals can be isolated |
| EN 1790-1998 |
道路標記材料 預制道路標記 |
Road marking materials - Preformed roads markings |
| EN 1790/prA1-2001 |
道路標記材料 預制道路標記 修改A1 |
Road marking materials - Preformed roads markings; Amendment A1 |
| EN 1791-1997 |
表面活性劑 脂肪烷基二甲胺氧化物 胺氧化物含量測定 |
Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content |
| EN 1792-2003 |
焊接 焊接和相關工多語種術語表 |
Welding - Multilingual list of terms for welding and related processes |
| EN 1793-1-1997 |
道路交通噪聲減低裝置 測定聲學性能的試驗方法 第1部分：聲音吸收的本征特性 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption |
| EN 1793-2-1997 |
道路交通噪聲減低裝置 聲學性能測定的試驗方法 第2部分：氣載聲音絕緣的固有特性 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation |
| EN 1793-3-1997 |
道路交通噪聲減低裝置 聲學性能測定的試驗方法 第3部分：標準化交通噪聲頻譜 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum |
| EN 1794-1-2003 |
道路交通噪聲降低裝置 非聲學性能 第1部分：機械性能和穩定性要求 |
Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements |
| EN 1794-2-2003 |
道路交通噪聲降低裝置 非聲學性能 第2部分：一般安全和環境要求 |
Road traffic noise reducing devices - Non-acoustic performance - Part 2: General safety and environmental requirements |
| EN 1795-1997 |
可運輸氣瓶(不含LPG) 變動煤設備的程序 |
Transportable gas cylinders (excluding LPG) - Procedures for change of gas service |
| EN 1797-2001 |
低溫容器 氣體/材料兼容性 |
Cryogenic vessels - Gas/material compatibility |
| EN 1799-1998 |
混凝土結構的防護和修理用產品和系統 試驗方法 應用于混凝土表面 的結構膠粘劑的適應性的測量試驗 |
Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface |
| EN 180101-1995 |
通用規范 固定式光纖衰減器 |
Generic specification: Fixed fibre optic attenuators |
| EN 1802-2002 |
可運輸氣瓶 無縫鋁合金氣瓶的周期檢驗和試驗 |
Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders |
| EN 1803-2002 |
可運輸氣瓶 焊接碳鋼周期檢驗和試驗 |
Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders |
| EN 1804-1-2001 |
地下采礦機械 水壓坑道頂棚支架的安全要求 第1部分：支撐單位和一般要求 |
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
| EN 1804-2-2001 |
地下采礦機械 水壓坑道頂棚支架的安全要求 第2部分：動力調整支架和活塞 |
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams |
| EN 1806-2000 |
煙窗 單壁煙窗粘土/ 陶瓷煙道設備 要求和試驗方法 |
Chimneys - Clay/ceramic flue blocks for single-wall chimneys - Requirements and test methods |
| EN 1807-1999 |
木工機械的安全 帶鋸機械 |
Safety of woodworking machines - Band sawing machines |
| EN 1808-1999 |
懸浮通道設備的安全要求 設計計算 穩定性準則 結構試驗 |
Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests |
| EN 1809-1997 |
潛水附件 浮力補償器 功能和安全要求 試驗方法 |
Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods |
| EN 1810-1998 |
人體部位穿孔用成套組件 火焰原子吸收分光光度法測定鎳含量的基準試驗方法 |
Body-piercing post assemblies - Reference test method for determination of nickel content by flame atomic absorption spectrometry |
| EN 181000-1994 |
通用規范：光纖分路器 |
Generic specification: Fibre optic branching devices |
| EN 1811-1998 |
直接和長時間接觸皮膚的產品中鎳釋放量的基準試驗方法 |
Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin |
| EN 181101-1994 |
空白詳細規范：光纖分路器類型：非波長選擇傳輸?shù)男切芜B接 |
Blank detail specification: Fibre optic branching devices - Type: Non wavelength selective transmissive star |
| EN 181102-1994 |
空白詳細規范：光纖分路器類型：波長選擇傳輸?shù)男切芜B接 |
Blank detail specification: Fibre optic branching devices - Type: Wavelength selective transmissive star |
| EN 181103-1997 |
空白詳細規范：光纖分路器類型：電信用非波長選擇傳輸?shù)男切芜B接 |
Blank detail specification: Fibre optic branching devices - Type: Non wavelength selective transmissive star for telecommunication application |
| EN 181104-1997 |
空白詳細規范：光纖分路器類型：電信用波長選擇傳輸?shù)男切芜B接 |
Blank detail specification: Fibre optic branching devices - Type: Wavelength selective transmissive star for telecommunication application |
| EN 1813-1997 |
鋪地織物 用研磨機器對羊毛纖維完整性的測定 |
Textile floor coverings - Determination of wool fibre integrity using an abrasion machine |
| EN 1814-1997 |
鋪地織物 用改良威特曼鼓試驗測定耐切邊損害性 |
Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
| EN 1815-1997 |
彈性地板和鋪地織物 靜電性能評估 |
Resilient and textile floor coverings - Assessment of static electrical propensity |
| EN 1816-1998 |
彈性地板覆蓋物 帶有泡沫襯背的同質和不同質光滑橡膠地板覆蓋物規范 |
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing |
| EN 1817-1998 |
彈性地板覆蓋物 同質和不同質光滑橡膠地板覆蓋物規范 |
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings |
| EN 1818-1998 |
彈性地板覆蓋物 荷載重載小腳輪影響的測定 |
Resilient floor coverings - Determination of the effect of loaded heavy duty castors |
| EN 1819-1997 |
氣管插管喉鏡 特殊要求 |
Laryngoscopes for tracheal intubation - Particular requirements |
| EN 1820-1997 |
麻醉儲藏袋 |
Anaesthetic reservoir bags |
| EN 1821-1-1996 |
電動道路車輛 道路運行能力的測量 第1部分：純電動車輛 |
Electrically propelled road vehicles - Measurement of road operating ability - Part 1: Pure electric vehicles |
| EN 1821-2-1999 |
電動道路車輛 道路運行能力的測量 第2部分：熱電動復合動力車 |
Electrically propelled road vehicles - Measurement of road operating ability - Part 2: Thermal electric hybrid vehicles |
| EN 1822-1-1998 |
高效空氣過濾器(HEPA和ULPA) 第1部分：分類、性能試驗和標記 |
High efficiency air filters (HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| EN 1822-2-1998 |
高效空氣過濾器(HEPA和ULPA) 第二部分： 懸浮微粒產生、測量設備、顆粒計數統計 |
High efficiency air filters (HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics |
| EN 1822-3-1998 |
高效空氣過濾器(HEPA和ULPA) 第3部分：試驗扁片狀過濾介質 |
High efficiency air filters (HEPA and ULPA) - Part 3: Testing flat sheet filter media |
| EN 1822-4-2000 |
高效顆�？諝膺^濾器 第4部分：濾器件的滲漏率測定（掃描法） |
High efficiency particulate air filters (HEPA and ULPA) - Part 4: Determining leakage of filter element (Scan method) |
| EN 1822-5-2000 |
高效顆�？諝膺^濾器 第5部分：濾器件的功效測定（掃描法） |
High efficiency particulate air filters (HEPA and ULPA) - Part 5: Determining the efficiency of the filter element |
| EN 1824-1998 |
道路標記材料 道路試件 |
Road marking materials - Road trials |
| EN 1825-1-2004 |
油脂分離器.第1部分:設計、性能和試驗以及標記和質量控制的準則 |
|
| EN 1825-2-2002 |
油脂分離器 第2部分：標稱尺寸的選擇、安裝、操作和維修 |
Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance |
| EN 1826-1996 |
生物工藝技術 大規模加工和生產 原材料控制程序 |
Biotechnology - Large-scale process and production - Control procedures for raw materials |
| EN 1827-1999 |
呼吸保護裝置 防止氣體或氣體和微�；騼H防顆粒的無吸入閥和帶可分離過濾器的半掩面罩 要求、試驗和標記 |
Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
| EN 1828-2002 |
健康信息學 外科程序的分類和編碼體系的類別結構 |
Health informatics - Categorial structure for classifications and coding systems of surgical procedures |
| EN 1834-1-2000 |
往復式內燃發動機 用在潛在爆炸環境下發動機設計結構和安全要求 第1部分：用在可燃氣體和蒸氣環境的II組 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
| EN 1834-2-2000 |
往復式內燃發動機 用在潛在爆炸環境下發動機設計結構和安全要求 第2部分：對沼氣和/或可燃性塵土敏感地下 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| EN 1834-3-2000 |
往復式內燃發動機 用在潛在爆炸環境下發動機設計結構和安全要求 第3部分：用在可燃灰塵環境下的II組發動 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
| EN 1835-1999 |
呼吸保護裝置 帶有頭盔和頭罩的輕型結構壓縮空氣的線狀呼吸裝置 要求、試驗、標記 |
Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking |
| EN 1836-1997 |
人的眼睛保護 常規使用的太陽鏡和濾光鏡 |
Personal eye protection - Sunglasses and sunglare filters for general use |
| EN 1836/prA2-2003 |
人的眼睛保護 常規使用的太陽鏡和濾光鏡 修改A2 |
Personal eye protection - Sunglasses, sunglare filters for general use and filters for direct observation of the sun; Amendment A2 |
| EN 1837-1999 |
機械的安全 機械的整體照明 |
Safety of machinery - Integral lighting of machines |
| EN 1838-1999 |
照明設施 應急照明 |
Lighting applications - Emergency lighting |
| EN 1839-2003 |
氣體和蒸氣爆炸限值的測定 |
Determination of explosion limits of gases und vapours |
| EN 1841-1998 |
粘合劑 地板覆蓋物和墻壁覆蓋物用粘合劑的試驗方法 與粘合劑粘接的油氈地板覆蓋物尺寸變化的測定 |
Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| EN 1842-1997 |
塑料 熱固模塑化合物(SMC-BMC).壓制模縮測定 |
Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com