標準號 |
中文名稱 |
英文名稱 |
| BS EN 60872-3-2001 |
海上導航和無線電通信設備及系統.雷達測繪輔助設備.電子繪圖手段(EPA).試驗方法和所要求的試驗結果 |
(Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Electronic plotting aid (EPA) - Performance requirements - Methods of testing and required test results) |
| BS EN 60873-1-2004 |
工業過程控制系統用電動和氣動模似圖表記錄儀.性能評定方法 |
|
| BS EN 60873-1987 |
工業過程控制系統用電動和氣動模似圖表記錄儀的性能評定方法 |
(Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems) |
| BS EN 60873-2-2004 |
工業過程控制系統用電動和氣動模似圖表記錄儀.檢查和常規試驗指南 |
|
| BS EN 60873-2-2004 |
工業過程控制系統用電動和氣動模似圖表記錄儀.檢查和常規試驗指南 |
|
| BS EN 60874-1-1999 |
光纖和光纜連接器.通用規范 |
(Connectors for optical fibres and cables - Generic specification) |
| BS EN 60874-17-1997 |
光纖和電纜的接頭.纖維光學接頭的部分規范.F-05型(磨擦鎖定) |
(Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock)) |
| BS EN 60874-19-1997 |
光纖和光纜連接器.光纖連接器的分規范.SC-D(雙)型 |
(Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type SC-D (Duplex)) |
| BS EN 60874-1997 |
光纖和光纜用連接器.光纖連接器的分規格.(SC-D)型(雙制的) |
(Connectors for optical fibres and cables. Sectional specification for fibre optic connector. Type SC-D (Duplex)) |
| BS EN 60875-1-1-1998 |
纖維光學分流裝置.空白詳細規格 |
(Fibre optic branching devices - Blank detail specification) |
| BS EN 60875-1-2001 |
光纖分流裝置.總規范 |
(Fibre optic branching devices - Generic specification) |
| BS EN 60876-1-2001 |
光纖空間開關.總規范 |
(Fibre optic spatial switches - Generic specification) |
| BS EN 60885-2-2003 |
電纜的電氣試驗方法.局部放電試驗 |
(Electrical test methods for electric cables - Partial discharge tests) |
| BS EN 60885-3-2003 |
電纜的電氣試驗方法.測量擠壓電力電纜段局部放電的試驗方法 |
(Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables) |
| BS EN 60889-1997 |
架空線導線用硬拉制鋁線 |
(Hard drawn aluminium wire for overhead line conductors) |
| BS EN 60891-1995 |
對晶體硅光電器件測量特性I-V的溫度修正和輻照度修正的方法 |
(Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices) |
| BS EN 60893-1-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.第1部分:定義、標記和一般要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Definitions, designations and general requirements) |
| BS EN 60893-1-2004 |
電工用熱固性樹脂基工業硬質層壓薄板規范.定義、標記和一般要求 |
|
| BS EN 60893-1-2004 |
絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.定義、標記和一般要求 |
|
| BS EN 60893-2-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.試驗方法 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test) |
| BS EN 60893-2-2004 |
電工用熱固性樹脂基工業硬質層壓板規范.試驗方法 |
|
| BS EN 60893-2-2004 |
絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.試驗方法 |
|
| BS EN 60893-2-2004 |
絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.試驗方法 |
|
| BS EN 60893-3-1-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.第3部分:專用材料規范.第1活頁:工業剛性層壓板 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Types of industrial rigid laminated sheets) |
| BS EN 60893-3-1-2004 |
電工用熱固性樹脂基工業剛性層壓板規范.單項材料規范.工業鋼性層壓板類型要求 |
|
| BS EN 60893-3-1-2004 |
絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.工業硬質層壓薄板類型要求 |
|
| BS EN 60893-3-2-2000 |
電工用熱固性樹脂基工業剛性層壓板規范.單一材料規范.環氧樹脂基剛性層壓板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on e) |
| BS EN 60893-3-2-2004 |
電工用熱固性樹脂基工業剛性層壓板規范.單項材料規范.環氧樹脂基剛性層壓板要求 |
|
| BS EN 60893-3-2-2004 |
絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.環氧樹脂基硬質層壓薄板要求 |
|
| BS EN 60893-3-3-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.專用材料規范.三聚氰胺樹脂基剛性層壓薄板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on m) |
| BS EN 60893-3-3-2004 |
電工用熱固性樹脂基工業剛性層壓板規范.單項材料規范.三聚氰胺樹脂基剛性層壓板要求 |
|
| BS EN 60893-3-3-2004 |
絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.三聚氰胺樹脂基硬質層壓薄板要求 |
|
| BS EN 60893-3-4-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.第3部分:專用材料規范.第4活頁:酚醛樹脂基剛性層壓板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on p) |
| BS EN 60893-3-4-2004 |
電工用熱固性樹脂基工業剛性層壓板規范.單項材料規范.酚醛樹脂基剛性層壓板要求 |
|
| BS EN 60893-3-4-2004 |
絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.酚醛樹脂基硬質層壓薄板要求 |
|
| BS EN 60893-3-5-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.專用材料規范.聚酯樹脂基剛性層壓薄板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on p) |
| BS EN 60893-3-5-2004 |
電工用熱固性樹脂基工業剛性層壓板規范.單項材料規范.聚酯樹脂基剛性層壓板要求 |
|
| BS EN 60893-3-5-2004 |
絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.聚酯樹脂基硬質層壓薄板要求 |
|
| BS EN 60893-3-6-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.專用材料規范.硅氧烷樹脂基剛性層壓板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on s) |
| BS EN 60893-3-6-2004 |
電工用熱固性樹脂基工業剛性層壓板規范.單項材料規范.硅酮樹脂基剛性層壓板要求 |
|
| BS EN 60893-3-6-2004 |
絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范.硅酮樹脂基硬質層壓薄板要求 |
|
| BS EN 60893-3-7-1995 |
電工用熱固性樹脂基工業剛性層壓板規范.專用材料規范.聚酰亞胺樹脂基剛性層壓薄板的要求 |
(Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on p) |
| BS EN 60893-3-7-2004 |
電工用熱固性樹脂基工業剛性層壓板規范.單項材料規范.聚酰亞胺樹脂基剛性層壓板要求 |
|
| BS EN 60893-3-7-2004 |
絕緣材料.電工用熱固性樹脂基工業硬質層壓薄板.單項材料規范 |
|
| BS EN 60895-2003 |
帶電作業.標稱交流電壓800kV及以下和直流電壓±600kV的帶電作業用導電服 |
(Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and) |
| BS EN 60896-11-2003 |
固定式鉛酸蓄電池組.透氣型.一般要求和試驗方法 |
(Stationary lead-acid batteries - General requirements and methods of test - Vented types - General requirements and methods of tests) |
| BS EN 60896-2-1996 |
固定式鉛酸蓄電池.一般要求和試驗方法.第2部分:閥調節型 |
(Stationary lead-acid batteries - General requirements and methods of test - Valve regulated types) |
| BS EN 60898-1-2003 |
家用和類似設施用的過電流保護斷路器.交流操作斷路器 |
(Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c. operation) |
| BS EN 60898-2-2001 |
家用和類似用途電器裝置過電流保護斷路器.交流和直流操作的線路斷路器 |
(Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c. and d.c. operation) |
| BS EN 609-1-1999 |
農用和林業機械設備.原木劈木機安全.楔形劈木機 |
(Agricultural and forestry machinery - Safety of log splitters - Wedge splitters) |
| BS EN 609-2-2000 |
農用和林業機械設備.原木分裂機安全.螺釘分裂機 |
Agricultural and forestry machinery - Safety of log splitters - Screw splitters |
| BS EN 60900-1994 |
在交流電1000V和直流電1500V的情況下帶電作業用的手工工具 |
(Hand tools for live working up to 1000 V a.c. and 1500 V d.c.) |
| BS EN 60900-2004 |
帶電作業.交流1000V和直流1500V及以下帶電作業用手持工具 |
|
| BS EN 60901-1996 |
單帽熒光燈的規范.性能規范 |
(Specification for single-capped fluorescent lamps - Performance specifications) |
| BS EN 60903-1993 |
帶電作業用絕緣材料制有指手套和無指手套規范 |
(Specification for gloves and mitts of insulating material for live working) |
| BS EN 60903-2004 |
帶電作業.絕緣材料制手套 |
|
| BS EN 60904-1-1993 |
光電器件.第1部分:光電池電流.電壓性能的測定 |
(Photovoltaic devices - Measurement of photovoltaic current-voltage characteristics) |
| BS EN 60904-10-1998 |
光電器件.線性度測量方法 |
(Photovoltaic devices - Methods of linearity measurement) |
| BS EN 60904-2-1993 |
光電器件.第2部分:基準太陽能電池的要求 |
(Photovoltaic devices - Requirements for reference solar cells) |
| BS EN 60904-3-1993 |
光電器件.第3部分:帶基準光譜輻照數據的地球光電太陽能器件的測量原理 |
(Photovoltaic devices - Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data) |
| BS EN 60904-5-1996 |
光電器件.第5部分:用開路電壓法對光伏裝置的等效電池溫度的測定 |
(Photovoltaic devices - Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method) |
| BS EN 60904-6-1995 |
光電器件.太陽能模式參數要求 |
(Photovoltaic devices - Requirements for reference solar modules) |
| BS EN 60904-7-1998 |
光電器件.光電器件的試驗中波譜失調錯誤傳輸計算 |
(Photovoltaic devices - Computation of spectral mismatch error introduced in the testing of a photovoltaic device) |
| BS EN 60904-8-1998 |
光電器件.光電器件波譜反應的測量 |
(Photovoltaic devices - Measurement of spectral response of a photovoltaic (PV) device) |
| BS EN 60908-1999 |
錄音.光盤數字音響系統 |
(Audio recording - Compact disc digital audio system) |
| BS EN 60909-0-2001 |
三相交流系統內短路電流.電流的計算 |
(Short-circuit currents in three-phase a.c. systems - Calculation of currents) |
| BS EN 60917-1-1999 |
電子設備機械結構研制用模數序列.一般標準 |
(Modular order for the development of mechanical structures for electronic equipment practices - Generic standard) |
| BS EN 60917-2-1-1997 |
研制電子設備機械構件用模塊排序.25mm設備的接口配合尺寸的分規范.第1節:機殼和支架的尺寸 |
Modular order for the development of mechanical structures for electronic equipment practices - Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Detail specification - Dimensions for cabinets and racks |
| BS EN 60917-2-1994 |
研制電子設備機械構件用模塊排序.第2部分:25mm設備的接口配合尺寸的分規范 |
(Modular order for the development of mechanical structures for electronic equipment practices - Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice) |
| BS EN 60917-2-2-1997 |
研制電子設備機械構件用模塊排序.25mm設備的接口配合尺寸的分規范.第2節:輻助框架、底盤、底板、面板及插入件 |
Modular order for the development of mechanical structures for electronic equipment practices - Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Detail specification - Dimensions for subracks, chassis, backpl |
| BS EN 60921-1991 |
管形熒光燈鎮流器.性能要求 |
Specification for ballasts for tubular fluorescent lamps - Performance requirements |
| BS EN 60921-2005 |
管形熒光燈鎮流器.性能要求 |
|
| BS EN 60921-2005 |
管形熒光燈鎮流器.性能要求 |
|
| BS EN 60923-1996 |
電燈用輔助設備.放電燈(管形熒光燈除外)鎮流器.性能要求(IEC 923-88) |
Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements |
| BS EN 60925-1991 |
管形熒光直流電源鎮流器性能要求規范 |
Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps |
| BS EN 60927-1997 |
燈的附件規范.啟動裝置(輝光啟動器除外).性能要求 |
Specification for auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements |
| BS EN 60929-1992 |
管形熒光燈交流電源鎮流器規范.性能要求 |
Specification for a.c. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
| BS EN 60929-2004 |
管形熒光燈用交流電子鎮流器規范.性能要求 |
|
| BS EN 60931-1-1998 |
額定電壓1000V(包括1000V)以下的交流系統用非自動恢復型分流電力電容器.概述.性能、試驗和額定值.安全要求. |
(Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. General - Performance, testing and rating - Safety requirements - Guide for inst) |
| BS EN 60931-2-1996 |
額定電壓在1000V以下(含1000V)交流系統用非自恢復型分流電力電容器.老化試驗和破壞試驗 |
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Ageing test and destruction test |
| BS EN 60931-3-1997 |
大于等于1000V電壓的交流系統用非自愈并聯電力電容器.第3部分:內部熔斷器 |
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Internal fuses |
| BS EN 60933-3-1993 |
音頻、視頻和視聽系統.互連和匹配值.第3部分:使用625行,50幀無混合信號的便攜式VTRs和ENG攝像機互連接口規范 |
Audio, video and audiovisual systems - Interconnections and matching values - Specification for interface for the interconnection of ENG cameras and portable VTRs using non-composite signals, for 625 line/50 field systems |
| BS EN 60933-4-1994 |
音頻、視頻和視聽系統.互連和匹配值.第4部分:內部數字總線用連接器和接線點 |
Audio, video and audiovisual systems - Interconnections and matching values - Connector and cordset for domestic digital bus (D2B) |
| BS EN 60933-5-1993 |
音頻、視頻和視聽系統.互連和匹配值.錄像系統Y/C連接器.連接器的電匹配值和描述 |
Audio, video and audiovisual systems - Interconnections and matching values - Specification for Y/C connector for video systems - Electrical matching values and description of the connector |
| BS EN 60934-2001 |
設備斷路器 |
Circuit-breakers for equipment (CBE) |
| BS EN 60936-1-2000 |
船舶導航和無線電通信設備和系統.雷達.船用雷達.性能要求.試驗方法和需要的試驗結果 |
(Maritime navigation and radiocommunication equipment and systems - Radar - Shipborne radar - Performance requirements - Methods of testing and required test results) |
| BS EN 60936-2-1999 |
船舶導航和無線電通信設備和系統.雷達.高速駁船(HSC)用艦艇雷達.試驗方法和要求的試驗結果 |
(Maritime navigation and radiocommunication equipment and systems - Radar - Shipborne radar for high speed craft (HSC) - Methods of testing and required test results) |
| BS EN 60936-3-2002 |
船舶導航和無線電通信設備及系統.雷達.有海圖設備的雷達性能要求.試驗方法和要求的試驗結果 |
(Maritime navigation and radiocommunication equipment and systems - Radar - Radar with chart facilities - Performance requirements - Methods of testing and required test results) |
| BS EN 60938-1-2000 |
電磁干擾抑制用固定電感器.通用規范 |
(Fixed inductors for electromagnetic interference suppression - Generic specification) |
| BS EN 60938-2-1-2000 |
電磁干擾抑制用固定電感器.空白詳細規范.要求做安全試驗的電感器.評估等級D |
(Fixed inductors for electromagnetic interference suppression - Blank detail specification - Inductors for which safety tests are required - Assessment level D) |
| BS EN 60938-2-2-2000 |
電磁干擾抑制用固定電感器.空白詳細規范.僅要求做安全試驗的電感器 |
(Fixed inductors for electromagnetic interference suppression - Blank detail specification - Inductors for which safety tests are required (only)) |
| BS EN 60938-2-2000 |
電磁干擾抑制用固定電感器.分規范 |
(Fixed inductors for electromagnetic interference suppression - Sectional specification) |
| BS EN 60939-2-1-2005 |
抑制無線電干擾用整套濾波裝置.空白詳細規范.抑制電磁干擾用無源過濾裝置.要求安全試驗的過濾器(評定等級D/DZ) |
|
| BS EN 60939-2-2-2005 |
抑制無線電干擾用整套濾波裝置.空白詳細規范.抑制電磁干擾用無源過濾裝置.要求安全試驗的過濾器(只用于安全試驗) |
|
| BS EN 60939-2-2005 |
抑制電磁干擾用無源濾波裝置.分規范:要求安全試驗的無源濾波裝置.試驗方法和一般要求 |
|
| BS EN 60942-2003 |
電聲學.音響校準器 |
(Electroacoustics - Sound calibrators) |
| BS EN 60945-2003 |
海上導航和無線電設備及系統.一般要求.試驗方法和要求的試驗結果 |
(Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results) |
| BS EN 60947-1-1999 |
低壓開關和控制設備規范.一般規則 |
(Specification for low-voltage switchgear and controlgear - General rules) |
| BS EN 60947-1-2004 |
低壓開關設備和控制設備規范.總則 |
|
| BS EN 60947-2-2003 |
低壓開關設備和控制設備規范.斷路器 |
(Specification for low-voltage switchgear and controlgear - Circuit-breakers) |
| BS EN 60947-3-1999 |
低壓開關和控制裝置.開關,斷路器,開關斷路器和熔燃單 |
(Specification for low-voltage switchgear and controlgear - Switches, disconnectors, switch-disconnectors and fuse-combination units) |
| BS EN 60947-4-1-2001 |
低壓開關設備和控制設備規范.接觸器和啟動器.電動機械接觸器和啟動器 |
(Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - Electromechanical contactors and motor-starters) |
| BS EN 60947-4-2-2000 |
低壓開關設備和控制設備規范.接觸器和電動機起動器.交流半導體電動機控制器和起動器 |
(Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - A.C. semiconductor motor controllers and starters) |
| BS EN 60947-4-3-2000 |
低壓開關設備和控制設備規范.接觸器和電動機起動器.交流半導體控制器和非電動機負載用起動器 |
(Specification for low-voltage switchgear and controlgear - Contactors and motor-starters - Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads) |
| BS EN 60947-5-1-1998 |
低壓開關設備和控制設備規范.控制電路器件和切換件.機電控制電路器件 |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Electromechanical control circuit devices) |
| BS EN 60947-5-1-2004 |
低壓開關設備和控制設備規范.控制電路器件和切換件.機電控制電路器件 |
|
| BS EN 60947-5-1-2004 |
低壓開關設備和控制設備規范.控制電路器件和切換件.機電控制電路器件 |
|
| BS EN 60947-5-1-2004 |
低壓開關設備和控制設備規范.控制電路器件和切換件.機電控制電路器件 |
|
| BS EN 60947-5-2-1999 |
低壓開關設備和控制設備規范.控制電路設備和開關件.接近開關 |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Proximity switches) |
| BS EN 60947-5-3-1999 |
低壓開關設備和控制設備規范.控制電路設備和開關件.錯誤條件下(PDF)固定行為臨近裝置的要求 |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)) |
| BS EN 60947-5-4-1997 |
低壓開關設備和控制設備的規范.控制線路裝置和開關件.低能量接觸性能評估.特殊試驗 |
Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Methods of assessing the performance of low energy contacts - Special tests |
| BS EN 60947-5-5-1998 |
低壓開關設備和控制設備規范.控制線路設備和開關件.用機械鎖定功能的緊急停電裝置 |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Electrical emergency stop devices with mechanical latching function) |
| BS EN 60947-5-6-2001 |
低壓開關設備和控制設備規范.控制電路設備和開關件.近接傳感器和開關放大器用直流接口(NAMUR) |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)) |
| BS EN 60947-5-7-2003 |
低壓開關設備和控制設備規范.控制電路裝置和開關件.帶模擬輸出的鄰近設備的要求 |
(Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - Requirements for proximity devices with analogue output) |
| BS EN 60947-6-1-1992 |
低壓開關和控制設備規范.多功能設備.自動切換開關設備 |
(Specification for low-voltage switchgear and controlgear - Multiple function equipment - Automatic transfer switching equipment) |
| BS EN 60947-6-2-2003 |
低壓開關設備和控制設備規范.多功能設備.控制和保護開關裝置(或設備)(CPS) |
(Specification for low-voltage switchgear and controlgear - Multiple function equipment - Control and protective switching devices (or equipment) (CPS)) |
| BS EN 60947-7-1-2002 |
低壓開關設備和控制設備規范.輔助設備.銅導線用接線板 |
(Specification for low-voltage switchgear and controlgear - Ancillary equipment - Terminal blocks for copper conductors) |
| BS EN 60947-7-2-2002 |
低壓開關設備和控制設備.輔助設備.銅導線用接線板的防護導線終端砧板 |
(Specification for low-voltage switchgear and controlgear - Ancillary equipment - Protective conductor terminal blocks for copper conductors) |
| BS EN 60947-7-3-2002 |
低壓開關設備和控制設備.輔助設備.導火線用接線板的安全要求 |
(Specification for low-voltage switchgear and controlgear - Ancillary equipment - Safety requirements for fuse terminal blocks) |
| BS EN 60947-8-2003 |
低壓開關設備和控制設備規范.旋轉電機用嵌入式熱保護控制裝置 |
(Specification for low-voltage switchgear and controlgear - Control units for built-in thermal protection (PTC) for rotating electrical machines) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com